Hello,
I have a MiniPC purchased from Aliexpress with an Intel N4100 CPU and 8GB of DDR4 RAM.
As it only has 1 SATA port and I have 2 disks of 3TB each of 3.5" I ended up using a USB 3.0 enclosure for 2 disks, Blueendless BS-DB3502A, despite it having RAID I decided to leave it without to use RaidZ anyway.
It's been more than 1 month since I installed Truenas Scale, I created the data pool with these USB disks, the system is on a 128GB SSD, I installed nextcloud and messed around a lot all this time.
But recently it started to have several crashes, reboot and kernel panic and I can't identify the reason.
The pools indicate healthy, it was scrubbed and everything else smart on the disks also doesn't indicate anything wrong, but problem happens. When the USB Enclosure is connected, the problem is almost direct, without it, only with the SSD where the system is installed, it happens less but it also happens, often at boot, sometimes after a while, sometimes after hours.
I thought it was in USB Enclosure, but how it goes even without it, I'm not sure. Tried to update Scale and same thing.
It seems that the problem happens when there is a longer read and write in any pool, such as when scrubbing.
Anyone have an idea what it could be? strange to have worked for weeks and now giving problem.
Hardware I used memtester and stress command for hours and nothing found error.
Attached a video with one of the kernel panics at boot, but it's very fast messages.
I have a MiniPC purchased from Aliexpress with an Intel N4100 CPU and 8GB of DDR4 RAM.
As it only has 1 SATA port and I have 2 disks of 3TB each of 3.5" I ended up using a USB 3.0 enclosure for 2 disks, Blueendless BS-DB3502A, despite it having RAID I decided to leave it without to use RaidZ anyway.
It's been more than 1 month since I installed Truenas Scale, I created the data pool with these USB disks, the system is on a 128GB SSD, I installed nextcloud and messed around a lot all this time.
But recently it started to have several crashes, reboot and kernel panic and I can't identify the reason.
The pools indicate healthy, it was scrubbed and everything else smart on the disks also doesn't indicate anything wrong, but problem happens. When the USB Enclosure is connected, the problem is almost direct, without it, only with the SSD where the system is installed, it happens less but it also happens, often at boot, sometimes after a while, sometimes after hours.
I thought it was in USB Enclosure, but how it goes even without it, I'm not sure. Tried to update Scale and same thing.
It seems that the problem happens when there is a longer read and write in any pool, such as when scrubbing.
Anyone have an idea what it could be? strange to have worked for weeks and now giving problem.
Hardware I used memtester and stress command for hours and nothing found error.
Attached a video with one of the kernel panics at boot, but it's very fast messages.