shpokas
Dabbler
- Joined
- Oct 3, 2014
- Messages
- 32
Hi there,
any idea why VIMAGE option is unavailable in my FreeNAS installation?
I have another test installation and all is fine there.
But this one was migrated and upgraded from 32-bit to 64-bit.
Note, promiscuous mode is enabled on interface (according to manual) even it seems not to be required for my test installation.
[root@vfs] ~# ifconfig bridge0
bridge0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC> metric 0 mtu 1500
ether 02:c0:75:36:94:00
inet 192.168.X.X netmask 0xffffff00 broadcast 192.168.17.255
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 10 priority 128 path cost 2000000
member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 20000
Cheers,
shpokas
any idea why VIMAGE option is unavailable in my FreeNAS installation?
I have another test installation and all is fine there.
But this one was migrated and upgraded from 32-bit to 64-bit.
Note, promiscuous mode is enabled on interface (according to manual) even it seems not to be required for my test installation.
[root@vfs] ~# ifconfig bridge0
bridge0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC> metric 0 mtu 1500
ether 02:c0:75:36:94:00
inet 192.168.X.X netmask 0xffffff00 broadcast 192.168.17.255
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 10 priority 128 path cost 2000000
member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 20000
Cheers,
shpokas
Attachments
Last edited: