Jails cannot be accessed.

[Monkeysphere]

Hi Guys,

Been beating my head on my desk about this for a while now.

All plugins/jail programs result in the same but lets just limit it to Transmission for now.

Clean Freenas install, wiped all drives, new plugin install.

ifconfig, netstat and others seem to report as they should and I can ping in and out from the jail.

The best I can tell Transmission is not starting. When logged into the jail shell if I do var/log/messages to try and see if there are any errors it gets a permission denied. So I'm thinking perhaps for some reason I have no control over the Jails and neither does the Freenas system which is why it won't start. This is my 3rd clean install now so it is a reoccurring problem and I just can't figure out why.

Thanks.

 

[indy]

Did you try disabling VIMAGE in the jail config?
Also post the actual output from ifconfig.

 

[Monkeysphere]

Tried that.

Code:

root@transmission_1:/ # ifconfig                                                                                                   
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                 
        options=400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO>                                                    
        ether d0:50:99:26:4f:76                                                                                                    
        inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255                                                               
        media: Ethernet autoselect (1000baseT <full-duplex>)                                                                       
        status: active                                                                                                             
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536                                                                         
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                                  
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>                                                                      
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                      
        ether 02:fe:4a:c8:9c:00                                                                                                    
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15                                                                
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200                                                                   
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0                                                                   
        member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                              
                ifmaxaddr 0 port 6 priority 128 path cost 2000                                                                     
        member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>                                                                 
                ifmaxaddr 0 port 1 priority 128 path cost 20000                                                                    
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                        
        ether 02:4a:df:00:06:0a                                                                                                    
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                                                                                             
epair0b: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                         
        options=8<VLAN_MTU>                                                                                                        
        ether 02:5b:ca:00:07:0b                                                                                                    
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active  

 

[indy]

Make just one jail (if possible), disable vimage, reboot, post ifconfig again.

 

[Monkeysphere]

VIMAGE off

Code:

ifconfig                                                                                                   
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                         
        options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>                            
        ether d0:50:99:26:4f:76                                                                                                    
        inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255                                                               
        media: Ethernet autoselect (1000baseT <full-duplex>)                                                                       
        status: active                                                                                                             
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536                                                                         
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                                  
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>     

VIMAGE on

Code:

root@transmission_1:/ # ifconfig                                                                                                   
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                                  
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>                                                                      
        inet6 ::1 prefixlen 128                                                                                                    
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1                                                                                 
        inet 127.0.0.1 netmask 0xff000000                                                                                          
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>                                                                                  
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                                      
        options=8<VLAN_MTU>                                                                                                        
        ether 02:a9:ba:00:07:0b                                                                                                    
        inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255                                                               
        nd6 options=9<PERFORMNUD,IFDISABLED>                                                                                       
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                        
        status: active                                   

 

[indy]

Leave VIMAGE off for now, I found it tends to complicate things.
Do you have the Jail on the same subnet as the network card?
The Jail-IP should be listed next to the network cards IP.

 

[Monkeysphere]

Yes same subnet.

I can ping the jail from other computers on the network just fine and also ping the router from the jail.

If I run top inside the jail there is no transmission process running.

Output from messages log:

Code:

Jul 12 18:36:50 transmission_1 newsyslog[14192]: logfile first created                                                             
Jul 12 18:36:50 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 12 22:47:53 transmission_1 syslogd: exiting on signal 15                                                                       
Jul 13 12:35:02 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 13 17:02:22 transmission_1 syslogd: exiting on signal 15                                                                       
Jul 13 17:02:31 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 13 18:00:06 transmission_1 syslogd: exiting on signal 15                                                                       
Jul 13 18:03:50 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 13 18:14:14 transmission_1 syslogd: exiting on signal 15                                                                       
Jul 13 18:16:33 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 13 23:16:31 transmission_1 syslogd: exiting on signal 15                                                                       
Jul 13 23:16:45 transmission_1 syslogd: kernel boot file is /boot/kernel/kernel                                                    
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: _secure_path: /etc/login.conf is world writable                              
Jul 13 23:16:45 transmission_1 /usr/sbin/cron[12000]: login_getclass: unknown class 'daemon'                                       
Jul 13 23:20:00 transmission_1 cron[12603]: _secure_path: /etc/login.conf is world writable                                        
Jul 13 23:20:00 transmission_1 cron[12603]: login_getclass: unknown class 'daemon'                                                 
Jul 13 23:20:00 transmission_1 cron[12603]: _secure_path: /etc/login.conf is world writable              

 

[dlavigne]

Which version of FreeNAS?

 

[Monkeysphere]

Latest Stable.

So far I really like the functionality of FreeNAS as a simple NAS box but anything Jail or plugin related is completely and utterly broken which is a shame.