spencerisadog
Dabbler
- Joined
- Jan 30, 2016
- Messages
- 11
Hello all, I ran in to a problem when suddenly I had to change my router IP. Now none of my jails will connect to the internet. I did some Googling and found what perfectly describes my problem. When a jail gets created it copies the root resolv.conf to the jail, but never updates it if the host resolv.conf changes. I followed that guide to copy the root resolv.conf to each jail. I also ran the "route del default" and "route add default 192.168.1.10" on each jail, which fixed the problem. However, after a reboot, it doesn't work again, the jail can not see the Internet. I have to run the "route del / add" commands to get it to work again. Running "netstat -r" on my root shell shows the correct default gateway.
When I run netstat -rn from shell:
netstat -rn from jail shows "no namelist"
Any ideas would be appreciated!
When I run netstat -rn from shell:
Code:
[root@freenas ~]# netstat -rn Routing tables Internet: Destination Gateway Flags Netif Expire default 192.168.1.10 UGS bce0 127.0.0.1 link#7 UH lo0 192.168.1.0/24 link#1 U bce0 192.168.1.201 link#1 UHS lo0 Internet6: Destination Gateway Flags Netif Expire ::/96 ::1 UGRS lo0 ::1 link#7 UH lo0 ::ffff:0.0.0.0/96 ::1 UGRS lo0 fe80::/10 ::1 UGRS lo0 fe80::%lo0/64 link#7 U lo0 fe80::1%lo0 link#7 UHS lo0 ff01::%lo0/32 ::1 U lo0 ff02::/16 ::1 UGRS lo0 ff02::%lo0/32 ::1 U lo0 [root@freenas ~]#
netstat -rn from jail shows "no namelist"
Any ideas would be appreciated!
Last edited: