pro_trouble
Dabbler
- Joined
- Oct 2, 2014
- Messages
- 10
I have an openVPN server configured on my router and have my clients connecting just fine. The issue I am running into is as follows:
When connected over the VPN using the 'tun' adapter, only 1 of my 4 jails is reachable (plexmediaserver). If I connect with the 'tap' adapter then all of my jails are reachable (plexmediaserver, owncloud, transmission, sonarr). Everything else on my network behaves identically regardless of the configuration (i.e. only those 3 jails can't be reached). if I use the 'tun' adapter and ssh into my freenas I can ping the other jails normally. I've gone through all the settings I can find for the jails and haven't found anything that is different between the jails. As it stands, I have no idea where to keep looking.
This is only really important for ownCloud, since iOS doesn't support the tap interface, i can't connect to the owncloud server over the vpn.
Any thoughts? I have posted both server configurations below if it is of any help. My LAN is on 10.10.10.x.
Any help is appreciated.
TUN configuration:
TAP Configuration:
When connected over the VPN using the 'tun' adapter, only 1 of my 4 jails is reachable (plexmediaserver). If I connect with the 'tap' adapter then all of my jails are reachable (plexmediaserver, owncloud, transmission, sonarr). Everything else on my network behaves identically regardless of the configuration (i.e. only those 3 jails can't be reached). if I use the 'tun' adapter and ssh into my freenas I can ping the other jails normally. I've gone through all the settings I can find for the jails and haven't found anything that is different between the jails. As it stands, I have no idea where to keep looking.
This is only really important for ownCloud, since iOS doesn't support the tap interface, i can't connect to the owncloud server over the vpn.
Any thoughts? I have posted both server configurations below if it is of any help. My LAN is on 10.10.10.x.
Any help is appreciated.
TUN configuration:
Code:
daemon server 10.8.0.0 255.255.255.0 proto udp port 443 dev tun21 comp-lzo adaptive keepalive 15 60 verb 3 push "route 10.10.10.0 255.255.255.0" client-config-dir ccd client-to-client duplicate-cn push "dhcp-option DNS 10.10.10.1" ca ca.crt dh dh.pem cert server.crt key server.key status-version 2 status status topology subnet
TAP Configuration:
Code:
daemon server-bridge push "route 0.0.0.0 255.255.255.255 net_gateway" proto udp port 444 dev tap22 comp-lzo adaptive keepalive 15 60 verb 3 duplicate-cn push "dhcp-option DNS 10.10.10.1" ca ca.crt dh dh.pem cert server.crt key server.key status-version 2 status status topology subnet