snowmirage
Dabbler
- Joined
- Sep 20, 2011
- Messages
- 29
I am currently running
FreeNAS-8.0.1-RC2-amd64 (7813)
I have a raidz1 array containing 6x500GB drives. From these drives I have a 500GB volume setup to share to my ESXi sever via iSCSI. The remainder of the space I have shared out via CIFS to PC's on my network.
Everything seemed to be fine since i set it all up a few days ago. Today I was copying about 15GB of files from my desktop to the CIFS share and it errored out. Could no longer reach that CIFS share.
I checked it on another PC and sure enough I could not reach the share on the network. My freenas box is up and running i can still access the GUI. I then checked on the iSCSI target. From my ESXi box it appears to be down, which really stinks since there were two active windows VM's running off that iSCSI target.
Going through the GUI, I see zero indication that anything is wrong. There doesn't seem to be any indication that any services have stopped or anything of the sort. As such I'm not even sure where to start troubleshooting this. I could understand if it wasn't working at all, in that case I would assume I probably mis configured something but its been running fine for at least 2 days no suddenly its down?
I have the Freenas box sending its logs out to my syslog sever and only irregular entery I saw looked like it had to do with the iSCSI service (istgt ??) and the message was "TASK ABORTED"
I'd greatly appreciate any advice any of you might have.
*EDIT*
Just realized "sharing" may be a more appropriate place for this thread please feel free to move it if so
FreeNAS-8.0.1-RC2-amd64 (7813)
I have a raidz1 array containing 6x500GB drives. From these drives I have a 500GB volume setup to share to my ESXi sever via iSCSI. The remainder of the space I have shared out via CIFS to PC's on my network.
Everything seemed to be fine since i set it all up a few days ago. Today I was copying about 15GB of files from my desktop to the CIFS share and it errored out. Could no longer reach that CIFS share.
I checked it on another PC and sure enough I could not reach the share on the network. My freenas box is up and running i can still access the GUI. I then checked on the iSCSI target. From my ESXi box it appears to be down, which really stinks since there were two active windows VM's running off that iSCSI target.
Going through the GUI, I see zero indication that anything is wrong. There doesn't seem to be any indication that any services have stopped or anything of the sort. As such I'm not even sure where to start troubleshooting this. I could understand if it wasn't working at all, in that case I would assume I probably mis configured something but its been running fine for at least 2 days no suddenly its down?
I have the Freenas box sending its logs out to my syslog sever and only irregular entery I saw looked like it had to do with the iSCSI service (istgt ??) and the message was "TASK ABORTED"
I'd greatly appreciate any advice any of you might have.
*EDIT*
Just realized "sharing" may be a more appropriate place for this thread please feel free to move it if so