indivision
Guru
- Joined
- Jan 4, 2013
- Messages
- 806
I'm getting errors like this on my ada3 drive:
I have found threads with others seeing the same error. It looks like the first steps are to replace the SATA cable and then try a different SATA port. I will do those. In the meantime, does anyone see anything wrong with this drive?
"zpool status -v":
"smartctl -a /dev/ada3":
I have a new spare ready to plug in if this drive needs to be replaced. But, as far as I can tell, the drive is reporting to be ok, no?
Code:
> (ada3:ahcich5:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 58 9e 66 40 1d 00 00 01 00 00 > (ada3:ahcich5:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada3:ahcich5:0:0:0): Retrying command > (ada3:ahcich5:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00
I have found threads with others seeing the same error. It looks like the first steps are to replace the SATA cable and then try a different SATA port. I will do those. In the meantime, does anyone see anything wrong with this drive?
"zpool status -v":
Code:
pool: freenas-boot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da0p2 ONLINE 0 0 0 da1p2 ONLINE 0 0 0 errors: No known data errors pool: optimus state: ONLINE scan: scrub repaired 0 in 7h15m with 0 errors on Sun Aug 28 07:15:17 2016 config: NAME STATE READ WRITE CKSUM optimus ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/ef276eb5-e507-11e3-a0e9-3085a93e10d2 ONLINE 0 0 0 gptid/f05b2144-e507-11e3-a0e9-3085a93e10d2 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 gptid/09840d8d-e508-11e3-a0e9-3085a93e10d2 ONLINE 0 0 0 gptid/0a73e336-e508-11e3-a0e9-3085a93e10d2 ONLINE 0 0 0 errors: No known data errors
"smartctl -a /dev/ada3":
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68EUZN0 Serial Number: WD-WMC4M2914720 LU WWN Device Id: 5 0014ee 0ae704a77 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Oct 2 09:30:51 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26940) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 272) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 173 021 Pre-fail Always - 4175 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 99 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20453 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 99 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 61 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 139 194 Temperature_Celsius 0x0022 110 104 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20448 - # 2 Extended offline Completed without error 00% 20428 - # 3 Short offline Completed without error 00% 20400 - # 4 Short offline Interrupted (host reset) 90% 20376 - # 5 Short offline Completed without error 00% 20352 - # 6 Short offline Completed without error 00% 20328 - # 7 Short offline Completed without error 00% 20304 - # 8 Short offline Completed without error 00% 20280 - # 9 Short offline Completed without error 00% 20256 - #10 Short offline Completed without error 00% 20232 - #11 Short offline Completed without error 00% 20208 - #12 Short offline Completed without error 00% 20184 - #13 Short offline Completed without error 00% 20160 - #14 Short offline Completed without error 00% 20136 - #15 Short offline Completed without error 00% 20112 - #16 Short offline Completed without error 00% 20088 - #17 Short offline Completed without error 00% 20064 - #18 Short offline Completed without error 00% 20040 - #19 Short offline Completed without error 00% 20016 - #20 Short offline Completed without error 00% 19992 - #21 Short offline Completed without error 00% 19968 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I have a new spare ready to plug in if this drive needs to be replaced. But, as far as I can tell, the drive is reporting to be ok, no?
