I have received this message several times from kerenel log messages for the past month. Last time I had it, a power cycle solved the problem then but not so this time. It There does not seem to impact the function much, but I am a tad worried, mainly because there seem to be a message about problematic USB ports, and the only peripherial connected to the server is the UPS (Server/UPS interaction is something you want to have functioning, especially with the thunder storm coming up)
My plan is to update bios and ipmi firmware to see it it removes the thing.
1.Is that a sensible course of action?
2. Should this be done in an particular order?
Note that I have posted about this before but I kind of messed that post up. I hope I've made this one a bit clearer and posted slightly less output so that it's at least nominally readable.
My plan is to update bios and ipmi firmware to see it it removes the thing.
1.Is that a sensible course of action?
2. Should this be done in an particular order?
Note that I have posted about this before but I kind of messed that post up. I hope I've made this one a bit clearer and posted slightly less output so that it's at least nominally readable.
Code:
> ipmi0: KCS Error Data ff > ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 > ukbd0 on uhub1 > ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 45> on usbus0 > kbd0 at ukbd0 > ums0 on uhub1 > ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 45> on usbus0 > ums0: 3 buttons and [Z] coordinates ID=0 > ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 (disconnected) > ipmi0: uhub1: at uhub0, port 12, addr 43 (disconnected) > KCS: Reply address mismatch > ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) > ukbd0: at uhub1, port 1, addr 45 (disconnected) > ukbd0: detached > ums0: at uhub1, port 1, addr 45 (disconnected) > ums0: detached > uhub1: detached > ipmi0: KCS Error Data ff > ipmi0: KCS Error Data ff > usbd_setup_device_desc: getting device descriptor at addr 46 failed, USB_ERR_SHORT_XFER > ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 > uhub1 on uhub0 > uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 46> on usbus0 > uhub1: 4 ports with 3 removable, self powered > ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 > ukbd0 on uhub1 > ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 47> on usbus0 > kbd0 at ukbd0 > ums0 on uhub1 > ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 47> on usbus0 > ums0: 3 buttons and [XYZ] coordinates ID=0 > ipmi0: KCS: Error retry exhausted > ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 (disconnected) > ukbd0: at uhub1, port 1, addr 47 (disconnected) > ukbd0: detached > ums0: at uhub1, port 1, addr 47 (disconnected) > ums0: detached > ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 > ukbd0 on uhub1 > ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 48> on usbus0 > kbd0 at ukbd0 > ums0 on uhub1