I just purchased this IBM 1015 and two of these mini-SAS cables. I crossflashed it to IT mode. My system sees the controller as being installed. However, the drives are not being detected. I don't know much about SAS connections. Could it be something to do with the cables? These guys have a SGPIO cable in addition to the 4 SATA cables. I have seen other cables without this connector. could this be my issue since the SGPIO cable is not being connected to anything?
At first I got the "WARNING: Firmware version 15 does not match driver version 16 for /dev/mps0". I re-flashed the firmware with the p16. The error went away, but drives are still not being detected.
Any input will be greatly appreciated.
At first I got the "WARNING: Firmware version 15 does not match driver version 16 for /dev/mps0". I re-flashed the firmware with the p16. The error went away, but drives are still not being detected.
Any input will be greatly appreciated.
Last edited: