boggie1688
Explorer
- Joined
- Jul 9, 2015
- Messages
- 58
Hi!
I just upgraded my freenas build's motherboard and cpu from an AMD Phenom 3 core to a Intel i5-2500K 4 core. Booted up fine, but I noticed in the reporting section of the system, it only lists:
Cpu0
Cpu1
Cpu2
Cpu3 is missing.
Freenas correctly detects that I now have a Intel i5 2500 4 core, but it appears to not be using the 4th core.
I ran:
dmesg | grep -i cpu
I received the following output:
I don't claim to completely understand everything there, but I imagine I should also be seeing "SMP: AP CPU #4 Launched!".
Anyone know how I might go about getting Freenas to use the 4th core?
I just upgraded my freenas build's motherboard and cpu from an AMD Phenom 3 core to a Intel i5-2500K 4 core. Booted up fine, but I noticed in the reporting section of the system, it only lists:
Cpu0
Cpu1
Cpu2
Cpu3 is missing.
Freenas correctly detects that I now have a Intel i5 2500 4 core, but it appears to not be using the 4th core.
I ran:
dmesg | grep -i cpu
I received the following output:
Code:
CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3309.79-MHz K8-class CPU) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3309.79-MHz K8-class CPU) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3309.79-MHz K8-class CPU) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3
I don't claim to completely understand everything there, but I imagine I should also be seeing "SMP: AP CPU #4 Launched!".
Anyone know how I might go about getting Freenas to use the 4th core?