Brian Wilson
Cadet
- Joined
- Aug 22, 2016
- Messages
- 8
Here is a list of all the disks. The ones of interest are mfisyspd20 and mfisyspd21, and then also ada0 and ada1. So I truncated the output:
Truncated........
These are exposed through the RAID Controller as JBODs. Wondering why i am seeing them listed twice.
Its making things confusing when going to setup the ZIL device for a ZFS pool since it shows that I Have 4 drives when i know for a fact that there are only 2 of these.
http://screencast.com/t/P2eCBvca
TIA for any help or suggestions on this.
Brian
Code:
[root@u90c10nas004] ~# geom disk list Geom name: mfisyspd0 Providers: 1. Name: mfisyspd0 Mediasize: 600127266816 (559G) Sectorsize: 512 Mode: r0w0e0 descr: (null) ident: (null) rotationrate: unknown fwsectors: 63 fwheads: 255
Truncated........
Code:
Geom name: mfisyspd20 Providers: 1. Name: mfisyspd20 Mediasize: 480103981056 (447G) Sectorsize: 512 Mode: r0w0e0 descr: (null) ident: (null) rotationrate: unknown fwsectors: 63 fwheads: 255 Geom name: mfisyspd21 Providers: 1. Name: mfisyspd21 Mediasize: 480103981056 (447G) Sectorsize: 512 Mode: r0w0e0 descr: (null) ident: (null) rotationrate: unknown fwsectors: 63 fwheads: 255 Geom name: mfid0 Providers: 1. Name: mfid0 Mediasize: 598999040000 (558G) Sectorsize: 512 Mode: r1w1e2 descr: (null) ident: (null) rotationrate: unknown fwsectors: 63 fwheads: 255 Geom name: ada0 Providers: 1. Name: ada0 Mediasize: 480103981056 (447G) Sectorsize: 512 Stripesize: 4096 Stripeoffset: 0 Mode: r0w0e0 descr: INTEL SSDSC2BB480G6K lunid: 55cd2e404c72d584 ident: PHWA613503N2480FGN rotationrate: 0 fwsectors: 63 fwheads: 16 Geom name: ada1 Providers: 1. Name: ada1 Mediasize: 480103981056 (447G) Sectorsize: 512 Stripesize: 4096 Stripeoffset: 0 Mode: r0w0e0 descr: INTEL SSDSC2BB480G6K lunid: 55cd2e404c72d02e ident: PHWA61340498480FGN rotationrate: 0 fwsectors: 63 fwheads: 16
These are exposed through the RAID Controller as JBODs. Wondering why i am seeing them listed twice.
Its making things confusing when going to setup the ZIL device for a ZFS pool since it shows that I Have 4 drives when i know for a fact that there are only 2 of these.
http://screencast.com/t/P2eCBvca
TIA for any help or suggestions on this.
Brian
Last edited by a moderator: