Hi, I need some help to interpreters this result. Is my harddrive broken?
Thanks for the help :)
Thanks for the help :)
Code:
[root@freenas] ~# smartctl -a /dev/da3 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WMC4N1551572 LU WWN Device Id: 5 0014ee 003bb2daa Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Mar 11 14:44:43 2017 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 248) Self-test routine in progress... 80% of test remaining. Total time to complete Offline data collection: (40980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 411) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 175 172 021 Pre-fail Always - 6225 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 52 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25968 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 52 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 51 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15 194 Temperature_Celsius 0x0022 102 092 000 Old_age Always - 48 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 25908 1565563136 # 2 Extended offline Completed: read failure 10% 25904 1565563136 # 3 Extended offline Completed: read failure 10% 25856 1565563136 # 4 Short offline Completed: read failure 60% 25836 1565563136 # 5 Short offline Completed: read failure 60% 25764 1565563136 # 6 Extended offline Completed: read failure 10% 25760 1565563136 # 7 Extended offline Completed: read failure 10% 25712 1565563136 # 8 Short offline Completed: read failure 10% 25693 1565563136 # 9 Short offline Completed: read failure 10% 25622 1565563136 #10 Extended offline Completed: read failure 10% 25617 1565563136 #11 Short offline Completed: read failure 10% 25501 1565563136 #12 Extended offline Completed: read failure 10% 25500 1565563136 #13 Extended offline Completed: read failure 10% 25449 1565563136 #14 Short offline Completed: read failure 10% 25431 1565563136 #15 Short offline Completed: read failure 60% 25357 1565563136 #16 Extended offline Completed: read failure 10% 25352 1565563136 #17 Short offline Completed: read failure 10% 25242 1565563136 #18 Extended offline Completed: read failure 10% 25232 1565563136 #19 Extended offline Completed: read failure 10% 25185 1565563136 #20 Short offline Completed: read failure 40% 25165 1565563136 #21 Short offline Completed: read failure 60% 25094 1565563136 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.