I've got FreeNAS installed on USB in a mini-ITX. Got it to give me an IP address I can browse to but I can't navigate to the WebGUI:
I did read this http://www.freebsd.org/releases/9.2R/hardware.html which states the "re(4) driver" supports my ethernet adapter. The link took me to http://www.freebsd.org/cgi/man.cgi?query=re&sektion=4. The instructions about what to write to the Kernel Configuration File – is that something that applies to me? Can I do that if the mini-ITX tower has no internet access?
I've been searching and reading, still haven't figured it out. Require help. Thanks.
FreeNAS (x64) 9.2.0 Current Stable Release
Purpose: home personal use
mobo: ASRock E350M1 AMD E-350 APU
LAN: Realtek RTL8111E
RAM: 8 GB
USB flash: 8 GB Sandisk
HDD: Seagate Barracuda 3 GB
Mini-ITX connected via ethernet cable to router
(1) Safari & Chrome both time out
(2) ping doesn't help. I get:
PING 192.168.1.108 (192.168.1.108): 56 data bytes
Request timeout for icmp_seq 7
ping: sendto: No route to host
Request timeout for icmp_seq 8
ping: sendto: Host is down
(3) Logged into my router and I don't see the NAS under "Wired Devices"
(4) Ethernet port has solid lights for both 'activity' and 'speed', no blinking
I did read this http://www.freebsd.org/releases/9.2R/hardware.html which states the "re(4) driver" supports my ethernet adapter. The link took me to http://www.freebsd.org/cgi/man.cgi?query=re&sektion=4. The instructions about what to write to the Kernel Configuration File – is that something that applies to me? Can I do that if the mini-ITX tower has no internet access?
I've been searching and reading, still haven't figured it out. Require help. Thanks.
FreeNAS (x64) 9.2.0 Current Stable Release
Purpose: home personal use
mobo: ASRock E350M1 AMD E-350 APU
LAN: Realtek RTL8111E
RAM: 8 GB
USB flash: 8 GB Sandisk
HDD: Seagate Barracuda 3 GB
Mini-ITX connected via ethernet cable to router