ethereal
Guru
- Joined
- Sep 10, 2012
- Messages
- 762
hello i recently had a problem with long smart tests not being run as scheduled. so i was trying to solve the problem but got some mixed smart data back.
smartctl -a /dev/da0 | grep "progress" -i -A 1
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
as you can see 10% remaining but if i run
as you can see here all tests completed without error 0% remaining. this is happening on 6 discs out of 12 and as you can see there is no extended test run recently.
so which command to believe 10% remaing or 0% all completed ?
are there any commands to see what is what?
thank you
smartctl -a /dev/da0 | grep "progress" -i -A 1
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
as you can see 10% remaining but if i run
Code:
smartctl -a /dev/da0 SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 37810 - # 2 Short offline Completed without error 00% 37787 - # 3 Short offline Completed without error 00% 37763 - # 4 Short offline Completed without error 00% 37738 - # 5 Short offline Completed without error 00% 37714 - # 6 Short offline Completed without error 00% 37690 - # 7 Short offline Completed without error 00% 37671 - # 8 Short offline Completed without error 00% 37643 - # 9 Short offline Completed without error 00% 37618 - #10 Short offline Completed without error 00% 37594 - #11 Short offline Completed without error 00% 37572 - #12 Short offline Completed without error 00% 37546 - #13 Short offline Completed without error 00% 36899 - #14 Short offline Completed without error 00% 36875 - #15 Short offline Completed without error 00% 36852 - #16 Extended offline Completed without error 00% 36847 - #17 Short offline Completed without error 00% 36827 - #18 Short offline Completed without error 00% 36803 - #19 Short offline Completed without error 00% 36779 - #20 Short offline Completed without error 00% 36755 - #21 Short offline Completed without error 00% 36732 -
as you can see here all tests completed without error 0% remaining. this is happening on 6 discs out of 12 and as you can see there is no extended test run recently.
so which command to believe 10% remaing or 0% all completed ?
are there any commands to see what is what?
thank you