mhweb
Explorer
- Joined
- Aug 4, 2019
- Messages
- 67
Hello,
I'm about to build my first FreeNAS server that I'll be using for Plex as well. As far as I can tell, this configuration works, but I was hoping to have a second set of eyes double-checking what I picked to see if it's compatible and a good build.
Here's what I'm planning to use:
PS: most of the hardware, I'll be buying used from eBay, except the hard drives and perhaps the cooler.
10x6TB WD Hard Drives 5400
CPU: Xeon E5-2680 v3
Cooler: Noctua NH-U12DX i4
RAM: 32GB (4x 8GB) SKhynix DDR4 Server RAM ECC
Mobo: SuperMicro X10SRL-F ATX
SAS: Genuine LSI 6Gbps SAS HBA LSI 9201-8i
PSU: Seasonic FOCUS GX-650, 650W 80+ Gold
Case: Rosewill RSV-L4412 - 4U (used)
SSD: boot drive
Thank you in advance and suggestions are welcome.
I'm about to build my first FreeNAS server that I'll be using for Plex as well. As far as I can tell, this configuration works, but I was hoping to have a second set of eyes double-checking what I picked to see if it's compatible and a good build.
Here's what I'm planning to use:
PS: most of the hardware, I'll be buying used from eBay, except the hard drives and perhaps the cooler.
10x6TB WD Hard Drives 5400
CPU: Xeon E5-2680 v3
Cooler: Noctua NH-U12DX i4
RAM: 32GB (4x 8GB) SKhynix DDR4 Server RAM ECC
Mobo: SuperMicro X10SRL-F ATX
SAS: Genuine LSI 6Gbps SAS HBA LSI 9201-8i
PSU: Seasonic FOCUS GX-650, 650W 80+ Gold
Case: Rosewill RSV-L4412 - 4U (used)
SSD: boot drive
Thank you in advance and suggestions are welcome.
