SerpentMage
Dabbler
- Joined
- May 16, 2017
- Messages
- 29
Hi All. I woke up this morning to an email from my TrueNAS system reporting the following:
I ran zpool status -v and got the following:
Which shows a CHSUM error on "gptid/41ab0ad2-ae07-11ec-85b8-d05099c29a6f".
I ran glabel status and found that it was drive ada3. So then I ran smartctl -a /dev/ada3 and got the following:
At this point the extent of my ability to read SMART data is basically "yup those are numbers". Would someone be able to check the SMART info and see if I need to look into replacing that drive or if I can just run a zpool clear on it and keep an eye on that drive for a bit?
Thanks for any help!
-John
Code:
New alerts: * Pool NASPOOL01 state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
I ran zpool status -v and got the following:
Code:
pool: NASPOOL01 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: scrub repaired 0B in 05:57:26 with 0 errors on Sat Sep 24 05:57:26 2022 config: NAME STATE READ WRITE CKSUM NASPOOL01 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/93b999af-ad5c-11ec-b39e-d05099c29a6f ONLINE 0 0 0 gptid/eca3b7a7-ad15-11ec-a6a3-d05099c29a6f ONLINE 0 0 0 gptid/3ac69d15-adc4-11ec-b771-d05099c29a6f ONLINE 0 0 0 gptid/41ab0ad2-ae07-11ec-85b8-d05099c29a6f ONLINE 0 0 1 errors: No known data errors pool: eDataStore state: ONLINE scan: scrub repaired 0B in 03:00:19 with 0 errors on Sun Sep 18 03:00:19 2022 config: NAME STATE READ WRITE CKSUM eDataStore ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/9368e7cf-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 gptid/68332ec6-b79c-11e8-a86b-d05099c29a6f.eli ONLINE 0 0 0 gptid/95024bc8-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 gptid/95c787c3-fe10-11e6-9c83-d05099c00cbc.eli ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE status: Some supported and requested features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0B in 00:03:32 with 0 errors on Fri Sep 23 03:48:32 2022 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da1p2 ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors
Which shows a CHSUM error on "gptid/41ab0ad2-ae07-11ec-85b8-d05099c29a6f".
I ran glabel status and found that it was drive ada3. So then I ran smartctl -a /dev/ada3 and got the following:
Code:
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p1 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST8000VN004-2M2101 Serial Number: WSD5P4DK LU WWN Device Id: 5 000c50 0e385cec6 Firmware Version: SC60 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Sep 28 06:36:25 2022 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 559) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 703) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 124290128 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 045 Pre-fail Always - 124818267 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4431 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 064 057 040 Old_age Always - 36 (Min/Max 20/43) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 185 194 Temperature_Celsius 0x0022 036 043 000 Old_age Always - 36 (0 20 0 0 0) 195 Hardware_ECC_Recovered 0x001a 081 064 000 Old_age Always - 124290128 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4424h+26m+30.571s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10617012980 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 86688173271 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
At this point the extent of my ability to read SMART data is basically "yup those are numbers". Would someone be able to check the SMART info and see if I need to look into replacing that drive or if I can just run a zpool clear on it and keep an eye on that drive for a bit?
Thanks for any help!
-John