madin3
Dabbler
- Joined
- Mar 14, 2017
- Messages
- 13
Hello all,
Started using FreeNAS about 6 months ago. Prior to that used a buggy Microsoft Windows Home Server on a HP StorageWorks DataVault x510 for many years until a drive died so I converted it into FreeNAS.
Loved it so much that I moved it into an HP Microserver Proliant gen8 g1610t. Installed Plexserver and Nextcloud
Upgrade 16Gb RAM and Intel Xeon E3-1239V2 3.3Hz Quad-core processor are in the mail.
Ran into an issue with FreeNAS 9.10.2 already "CRITICAL: The capacity for the volume 'freenas-boot' is currently at 90%, while the recommended value is below 80%."
So I'm going to be looking for a lot of advice on this and remote access to Nextcloud.
Cheers
Started using FreeNAS about 6 months ago. Prior to that used a buggy Microsoft Windows Home Server on a HP StorageWorks DataVault x510 for many years until a drive died so I converted it into FreeNAS.
Loved it so much that I moved it into an HP Microserver Proliant gen8 g1610t. Installed Plexserver and Nextcloud
Upgrade 16Gb RAM and Intel Xeon E3-1239V2 3.3Hz Quad-core processor are in the mail.
Ran into an issue with FreeNAS 9.10.2 already "CRITICAL: The capacity for the volume 'freenas-boot' is currently at 90%, while the recommended value is below 80%."
So I'm going to be looking for a lot of advice on this and remote access to Nextcloud.
Cheers