Marc Locchi
Dabbler
- Joined
- May 15, 2014
- Messages
- 12
Hi all,
I have an issue with what seems to be my SATA4 port, so that the drive does not report a serial number, nor the right number of smart test results (example: all drives return 21 SMART short test results, the drive in SATA4 returns 11 when running these via Putty, see output below)
I am not sure what to try next, as I cannot understand why only this drive port is not showing the drive details. Could it be related to this bug?
What I have tried:
- New SATA cable (literally new)
- New Drive (I have brand new spare WD Se)
- Change drive position in chain, always da4 is showing with missing serial.
My config:
- FreeNAS-9.2.1.6-RC2-72b8479-x64 - running off USB key
- Intel Server Board S2600CP4 Dual Xeon socket, Latest Firmware - 02.03.0003
- 10x 4TB HDD - WE Se Enterprise Drives, JBOD, no hardware raid, set up as RSTE (Intel SATA), AHCI, Bios set up to staggered spin up for drives.
- Xeon E2630 V3, 6 Core, 2.3GHz
- 32GB DDR3 HP ECC Server Memory
- 1x ZFS-2 volume (RAID 6)
- 4x Gb NIC aggregated
- Board Link: http://ark.intel.com/products/56334
Image of the "View Disks" panel:
Example output of smartctl -a -q noserial /dev/da4
Example of another drive:
I have an issue with what seems to be my SATA4 port, so that the drive does not report a serial number, nor the right number of smart test results (example: all drives return 21 SMART short test results, the drive in SATA4 returns 11 when running these via Putty, see output below)
I am not sure what to try next, as I cannot understand why only this drive port is not showing the drive details. Could it be related to this bug?
What I have tried:
- New SATA cable (literally new)
- New Drive (I have brand new spare WD Se)
- Change drive position in chain, always da4 is showing with missing serial.
My config:
- FreeNAS-9.2.1.6-RC2-72b8479-x64 - running off USB key
- Intel Server Board S2600CP4 Dual Xeon socket, Latest Firmware - 02.03.0003
- 10x 4TB HDD - WE Se Enterprise Drives, JBOD, no hardware raid, set up as RSTE (Intel SATA), AHCI, Bios set up to staggered spin up for drives.
- Xeon E2630 V3, 6 Core, 2.3GHz
- 32GB DDR3 HP ECC Server Memory
- 1x ZFS-2 volume (RAID 6)
- 4x Gb NIC aggregated
- Board Link: http://ark.intel.com/products/56334
Image of the "View Disks" panel:
Example output of smartctl -a -q noserial /dev/da4
Code:
[root@LSERVER] ~# smartctl -a -q noserial /dev/da4 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p9 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD4000F9YZ-09N20L0 Firmware Version: 01.01A01 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jul 29 18:30:52 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART STATUS RETURN: incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (41040) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 444) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 162 145 021 Pre-fail Always - 10900 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 154 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 887 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 154 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 153 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 122 112 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 779 - # 2 Short offline Completed without error 00% 605 - # 3 Short offline Completed without error 00% 525 - # 4 Short offline Completed without error 00% 523 - # 5 Short offline Completed without error 00% 359 - # 6 Short offline Completed without error 00% 347 - # 7 Short offline Completed without error 00% 335 - # 8 Short offline Completed without error 00% 323 - # 9 Short offline Completed without error 00% 311 - #10 Short offline Completed without error 00% 167 - #11 Short offline Completed without error 00% 155 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Example of another drive:
Code:
[root@LSERVER] ~# smartctl -a -q noserial /dev/ada0 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p9 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD4000F9YZ-09N20L0 Firmware Version: 01.01A01 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 29 18:30:03 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 440) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 152 148 021 Pre-fail Always - 11400 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 151 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 888 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 150 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 100 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 50 194 Temperature_Celsius 0x0022 123 103 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 887 - # 2 Short offline Completed without error 00% 875 - # 3 Short offline Completed without error 00% 861 - # 4 Short offline Completed without error 00% 859 - # 5 Short offline Completed without error 00% 848 - # 6 Short offline Completed without error 00% 844 - # 7 Short offline Completed without error 00% 832 - # 8 Short offline Completed without error 00% 820 - # 9 Short offline Completed without error 00% 808 - #10 Short offline Completed without error 00% 805 - #11 Short offline Completed without error 00% 793 - #12 Short offline Completed without error 00% 792 - #13 Short offline Completed without error 00% 780 - #14 Short offline Completed without error 00% 779 - #15 Short offline Completed without error 00% 767 - #16 Short offline Completed without error 00% 761 - #17 Short offline Completed without error 00% 752 - #18 Short offline Completed without error 00% 741 - #19 Short offline Completed without error 00% 723 - #20 Short offline Completed without error 00% 711 - #21 Short offline Completed without error 00% 700 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.