highbury
Cadet
- Joined
- Aug 20, 2013
- Messages
- 4
Hi,
I have a HP MicroServer with 4 x 3TB disks and 8GB memory, when trying to create my first volume, I'm only given the option to configure a mirrored set and not a RAIDZ2 config.
This is what results if I build what the 9.1 installer allows
[root@freenas] ~# zpool status -v
pool: ILSLEY-DATA1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
ILSLEY-DATA1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/a87393dd-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
gptid/a9215319-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
gptid/a9d3a943-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
gptid/aa8077dd-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
errors: No known data errors
(apologies if this doesn't display in fixed pitch)
I've destroyed this volume, thinking I missed an option on setup, but the Volume Layout option on the ZFS Volume Manager, only offers me the choice of "Mirrored, Stripe, Log or Spare"
How can I configure my system with RAIDZ2 ?
Thanks
I have a HP MicroServer with 4 x 3TB disks and 8GB memory, when trying to create my first volume, I'm only given the option to configure a mirrored set and not a RAIDZ2 config.
This is what results if I build what the 9.1 installer allows
[root@freenas] ~# zpool status -v
pool: ILSLEY-DATA1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
ILSLEY-DATA1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/a87393dd-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
gptid/a9215319-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
gptid/a9d3a943-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
gptid/aa8077dd-076a-11e3-9c82-68b59972b169 ONLINE 0 0 0
errors: No known data errors
(apologies if this doesn't display in fixed pitch)
I've destroyed this volume, thinking I missed an option on setup, but the Volume Layout option on the ZFS Volume Manager, only offers me the choice of "Mirrored, Stripe, Log or Spare"
How can I configure my system with RAIDZ2 ?
Thanks