okaenrique
Dabbler
- Joined
- Jul 22, 2015
- Messages
- 48
Hello!
i use 10G SFP but i i get message on my Cisco swith is
%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on freenas ix0 (half duplex)
network card is Intel X520 DP
mothercard is C2550D4I
1 x PCI-E x8 slot
on NAS i use intel SFP from switch cisco i use cisco SFP and the link is fiber mm
root@freenas] ~# ifconfig
ix0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: connected to SW(Te1/0/1)
options=e400b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether a0:36:9f:94:af:68
inet 192.168.0.240 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (Unknown <rxpause,txpause>)
status: active
i use 10G SFP but i i get message on my Cisco swith is
%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on freenas ix0 (half duplex)
network card is Intel X520 DP
mothercard is C2550D4I
1 x PCI-E x8 slot
on NAS i use intel SFP from switch cisco i use cisco SFP and the link is fiber mm
root@freenas] ~# ifconfig
ix0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: connected to SW(Te1/0/1)
options=e400b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether a0:36:9f:94:af:68
inet 192.168.0.240 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (Unknown <rxpause,txpause>)
status: active
Last edited: