Wisdom
Explorer
- Joined
- Oct 15, 2016
- Messages
- 71
So here's a problem I haven't been able to find anyone else having: FreeNAS works (mostly), but I can't change anything about it. Even directly through the console.
The story: I moved recently, so I turned off all my services that I wouldn't want cropping up all of a sudden on a new internet connection. I shut FreeNAS down, packed the case back up in its box, and got set up again at the new place. While getting my internet together on this side of the move, I had to move my entire subnet due to some awful TP-Link hardware (who knew 192.168.100.0 was so popular?), which included FreeNAS. I hopped into the webGUI, changed the interface information, and thought it would be fine.
Switching back to the Networking tab, I wanted to update the domain, default gateway, etc, but every time I tried to save, I immediately got a little "unexpected error!" prompt at the top of the page. Well, okay, annoying, but maybe I can restart my way around it. Nope.
I get this same error whenever I try to do just about anything through the webGUI. From restarting and shutting down to editing network information and jails. Even the plugins I already have installed I can't turn on and off! Furthermore, I haven't been able to make any real progress with the console - I'm hesitant to start hammering lines in just because I'm getting bitter about everything going to shit in my network today.
For what it's worth, I also have issues pinging out from the console. I can hit 1.1.1.1 (my primary DNS server) just fine, but anything else, if it connects, is in the ~350ms+ range. That said, LAN times are normal (<4ms).
So, thoughts?
Specs:
G4400
Asrock C236 WSI
8GB Kingston ECC RAM
6x3TB WD Reds
Corsair RMi550
Node 304
These are from memory, you'll have to forgive me if something doesn't look quite right. PCPP is also giving me errors on all my parts lists!
The story: I moved recently, so I turned off all my services that I wouldn't want cropping up all of a sudden on a new internet connection. I shut FreeNAS down, packed the case back up in its box, and got set up again at the new place. While getting my internet together on this side of the move, I had to move my entire subnet due to some awful TP-Link hardware (who knew 192.168.100.0 was so popular?), which included FreeNAS. I hopped into the webGUI, changed the interface information, and thought it would be fine.
Switching back to the Networking tab, I wanted to update the domain, default gateway, etc, but every time I tried to save, I immediately got a little "unexpected error!" prompt at the top of the page. Well, okay, annoying, but maybe I can restart my way around it. Nope.
I get this same error whenever I try to do just about anything through the webGUI. From restarting and shutting down to editing network information and jails. Even the plugins I already have installed I can't turn on and off! Furthermore, I haven't been able to make any real progress with the console - I'm hesitant to start hammering lines in just because I'm getting bitter about everything going to shit in my network today.
For what it's worth, I also have issues pinging out from the console. I can hit 1.1.1.1 (my primary DNS server) just fine, but anything else, if it connects, is in the ~350ms+ range. That said, LAN times are normal (<4ms).
So, thoughts?
Specs:
G4400
Asrock C236 WSI
8GB Kingston ECC RAM
6x3TB WD Reds
Corsair RMi550
Node 304
These are from memory, you'll have to forgive me if something doesn't look quite right. PCPP is also giving me errors on all my parts lists!