freenas crasha se lo stresso troppo

fefele · Apr 2, 2013

beh non so se è questo il motivo. cmq se faccio troppe operazioni contemporanee su uno o più dischi, la macchina crasha e non riesco più ad entrarvi ne come webgui ne come accesso alle condivisioni. unica alternativa è spegnere brutalmente, e questa cosa non mi piace. pensavo fosse un problema di calore interno al case, ma ora ho aperto il frontale togliendo alcuni schermi da 5.25 (quelli sotto il cdrom); poi davanti alla macchina ho messo un ventilatore che spara aria dalle 8.00 di mattina fino alle 10.00 della sera. la notte grazie alle temperature rigide che ho in sdala hobby (la casetta del mio freenas), la ventola è spenta. di fatto accade questo, se inizio a movimentare grosse quantità di dati, chessò 100gb per volta, freenas si imbambola e sono costretto a fare quanto sopra descritto. vorrei capire perchè. dove trovo un file di log che riporti queste cose?

grazie

slyferd · Apr 2, 2013

Forse hai poca RAM

fefele · Apr 2, 2013

Questa è la mia configurazione:

MB IBM modello e chipset sconosciuti (era un pc che avevo dismesso da tempo, abbiate pietà);

CPU: pentium 4 2.66

RAM: 2024 mb

dischi: 1TBsata + 1TBsata + 500GBide + 320GBide + 60GBide (S.O.)

altro non saprei...........

valesan · Apr 3, 2013

è sicuro qualcosa hardware che non va !
il pc l'avevi dismesso funzionante o dava problemi già allora ?

io opterei per la ram, ma non perché poca ma casomai difettosa !

un log ci dovrebbe essere ma dovresti cercare nel forum inglese, non ricordo dove e come lo salva !!!

fefele · Apr 3, 2013

valesan said:
è sicuro qualcosa hardware che non va !
il pc l'avevi dismesso funzionante o dava problemi già allora ? io opterei per la ram, ma non perché poca ma casomai difettosa !
un log ci dovrebbe essere ma dovresti cercare nel forum inglese, non ricordo dove e come lo salva !!!

ciao valesan,

il pc era perfettamente funzionante nel momento della dismissione. l'ho sostituito per feci un pc nuovo (quello si che è morto ora :) ). alla ram ci avevo pensatoanche perchè non è di tipo ECC.

ora cerco nella sezione in inglese se e come si può creare un log. il primo che trova qualcosa lo posta qui dentro, ok?

ho trovato qualcosa in sta nella directory /var/log, il file è messages:

Code:

Apr  2 23:08:43 FreeNAS newsyslog[1672]: logfile first created
Apr  2 23:08:43 FreeNAS syslogd: kernel boot file is /boot/kernel/kernel
Apr  2 23:08:43 FreeNAS kernel: Copyright (c) 1992-2012 The FreeBSD Project.
Apr  2 23:08:43 FreeNAS kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Apr  2 23:08:43 FreeNAS kernel: The Regents of the University of California. All rights reserved.
Apr  2 23:08:43 FreeNAS kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Apr  2 23:08:43 FreeNAS kernel: FreeBSD 8.3-RELEASE-p4 #0 r241984M: Wed Oct 24 08:35:12 PDT 2012
Apr  2 23:08:43 FreeNAS kernel: root@build.ixsystems.com:/usr/home/jpaetzel/8.3.0-RELEASE/os-base/i386/i386/usr/home/jpaetzel/8.3.0-RELEASE/FreeBSD/src/sys/FREENAS.i386 i386
Apr  2 23:08:43 FreeNAS kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Apr  2 23:08:43 FreeNAS kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2660.18-MHz 686-class CPU)
Apr  2 23:08:43 FreeNAS kernel: Origin = "GenuineIntel"  Id = 0xf29  Family = f  Model = 2  Stepping = 9
Apr  2 23:08:43 FreeNAS kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Apr  2 23:08:43 FreeNAS kernel: Features2=0x4400<CNXT-ID,xTPR>
Apr  2 23:08:43 FreeNAS kernel: real memory  = 2147483648 (2048 MB)
Apr  2 23:08:43 FreeNAS kernel: avail memory = 2076151808 (1979 MB)
Apr  2 23:08:43 FreeNAS kernel: ACPI APIC Table: <PTLTD          APIC  >
Apr  2 23:08:43 FreeNAS kernel: WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Apr  2 23:08:43 FreeNAS kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Apr  2 23:08:43 FreeNAS kernel: kbd1 at kbdmux0
Apr  2 23:08:43 FreeNAS kernel: hpt27xx: RocketRAID 27xx controller driver v1.0 (Oct 24 2012 08:35:04)
Apr  2 23:08:43 FreeNAS kernel: cryptosoft0: <software crypto> on motherboard
Apr  2 23:08:43 FreeNAS kernel: aesni0: No AESNI support.
Apr  2 23:08:43 FreeNAS kernel: acpi0: <PTLTD   RSDT> on motherboard
Apr  2 23:08:43 FreeNAS kernel: acpi0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: acpi0: Power Button (fixed)
Apr  2 23:08:43 FreeNAS kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Apr  2 23:08:43 FreeNAS kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
Apr  2 23:08:43 FreeNAS kernel: cpu0: <ACPI CPU> on acpi0
Apr  2 23:08:43 FreeNAS kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Apr  2 23:08:43 FreeNAS kernel: pci0: <ACPI PCI bus> on pcib0
Apr  2 23:08:43 FreeNAS kernel: vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf7ffffff,0xe8000000-0xe807ffff irq 16 at device 2.0 on pci0
Apr  2 23:08:43 FreeNAS kernel: agp0: <Intel 82865G (865G GMCH) SVGA controller> on vgapci0
Apr  2 23:08:43 FreeNAS kernel: agp0: aperture size is 128M, detected 8060k stolen memory
Apr  2 23:08:43 FreeNAS kernel: uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1820-0x183f irq 16 at device 29.0 on pci0
Apr  2 23:08:43 FreeNAS kernel: uhci0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
Apr  2 23:08:43 FreeNAS kernel: uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
Apr  2 23:08:43 FreeNAS kernel: uhci1: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
Apr  2 23:08:43 FreeNAS kernel: uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
Apr  2 23:08:43 FreeNAS kernel: uhci2: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
Apr  2 23:08:43 FreeNAS kernel: ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xe8080000-0xe80803ff irq 23 at device 29.7 on pci0
Apr  2 23:08:43 FreeNAS kernel: ehci0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: usbus3: EHCI version 1.0
Apr  2 23:08:43 FreeNAS kernel: usbus3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
Apr  2 23:08:43 FreeNAS kernel: pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Apr  2 23:08:43 FreeNAS kernel: pci3: <ACPI PCI bus> on pcib1
Apr  2 23:08:43 FreeNAS kernel: fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0x2000-0x203f mem 0xe8100000-0xe8100fff irq 20 at device 8.0 on pci3
Apr  2 23:08:43 FreeNAS kernel: miibus0: <MII bus> on fxp0
Apr  2 23:08:43 FreeNAS kernel: inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
Apr  2 23:08:43 FreeNAS kernel: inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
Apr  2 23:08:43 FreeNAS kernel: fxp0: Ethernet address: 00:09:6b:07:93:9c
Apr  2 23:08:43 FreeNAS kernel: fxp0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Apr  2 23:08:43 FreeNAS kernel: isa0: <ISA bus> on isab0
Apr  2 23:08:43 FreeNAS kernel: atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
Apr  2 23:08:43 FreeNAS kernel: ata0: <ATA channel> at channel 0 on atapci0
Apr  2 23:08:43 FreeNAS kernel: ata0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: ata1: <ATA channel> at channel 1 on atapci0
Apr  2 23:08:43 FreeNAS kernel: ata1: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: atapci1: <Intel ICH5 SATA150 controller> port 0x1898-0x189f,0x180c-0x180f,0x1890-0x1897,0x1808-0x180b,0x1880-0x188f irq 18 at device 31.2 on pci0
Apr  2 23:08:43 FreeNAS kernel: atapci1: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: ata2: <ATA channel> at channel 0 on atapci1
Apr  2 23:08:43 FreeNAS kernel: ata2: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: ata3: <ATA channel> at channel 1 on atapci1
Apr  2 23:08:43 FreeNAS kernel: ata3: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
Apr  2 23:08:43 FreeNAS kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached)
Apr  2 23:08:43 FreeNAS kernel: acpi_tz0: <Thermal Zone> on acpi0
Apr  2 23:08:43 FreeNAS kernel: acpi_tz0: _CRT value is absurd, ignored (6280.3C)
Apr  2 23:08:43 FreeNAS kernel: acpi_button0: <Power Button> on acpi0
Apr  2 23:08:43 FreeNAS kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Apr  2 23:08:43 FreeNAS kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Apr  2 23:08:43 FreeNAS kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Apr  2 23:08:43 FreeNAS kernel: kbd0 at atkbd0
Apr  2 23:08:43 FreeNAS kernel: atkbd0: [GIANT-LOCKED]
Apr  2 23:08:43 FreeNAS kernel: atkbd0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Apr  2 23:08:43 FreeNAS kernel: fdc0: [FILTER]
Apr  2 23:08:43 FreeNAS kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Apr  2 23:08:43 FreeNAS kernel: uart0: [FILTER]
Apr  2 23:08:43 FreeNAS kernel: ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
Apr  2 23:08:43 FreeNAS kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Apr  2 23:08:43 FreeNAS kernel: ppc0: FIFO with 16/16/8 bytes threshold
Apr  2 23:08:43 FreeNAS kernel: ppc0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: ppbus0: <Parallel port bus> on ppc0
Apr  2 23:08:43 FreeNAS kernel: lpt0: <Printer> on ppbus0
Apr  2 23:08:43 FreeNAS kernel: lpt0: [ITHREAD]
Apr  2 23:08:43 FreeNAS kernel: lpt0: Interrupt-driven port
Apr  2 23:08:43 FreeNAS kernel: pmtimer0 on isa0
Apr  2 23:08:43 FreeNAS kernel: orm0: <ISA Option ROMs> at iomem 0xca800-0xcb7ff,0xcb800-0xcc7ff,0xe0000-0xeffff pnpid ORM0000 on isa0
Apr  2 23:08:43 FreeNAS kernel: sc0: <System console> at flags 0x100 on isa0
Apr  2 23:08:43 FreeNAS kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Apr  2 23:08:43 FreeNAS kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Apr  2 23:08:43 FreeNAS kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Apr  2 23:08:43 FreeNAS kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Apr  2 23:08:43 FreeNAS kernel: Timecounter "TSC" frequency 2660182864 Hz quality 800
Apr  2 23:08:43 FreeNAS kernel: Timecounters tick every 1.000 msec
Apr  2 23:08:43 FreeNAS kernel: hpt27xx: no controller detected.
Apr  2 23:08:43 FreeNAS kernel: usbus0: 12Mbps Full Speed USB v1.0
Apr  2 23:08:43 FreeNAS kernel: usbus1: 12Mbps Full Speed USB v1.0
Apr  2 23:08:43 FreeNAS kernel: usbus2: 12Mbps Full Speed USB v1.0
Apr  2 23:08:43 FreeNAS kernel: usbus3: 480Mbps High Speed USB v2.0
Apr  2 23:08:43 FreeNAS kernel: ugen0.1: <Intel> at usbus0
Apr  2 23:08:43 FreeNAS kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Apr  2 23:08:43 FreeNAS kernel: ugen1.1: <Intel> at usbus1
Apr  2 23:08:43 FreeNAS kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Apr  2 23:08:43 FreeNAS kernel: ugen2.1: <Intel> at usbus2
Apr  2 23:08:43 FreeNAS kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Apr  2 23:08:43 FreeNAS kernel: ugen3.1: <Intel> at usbus3
Apr  2 23:08:43 FreeNAS kernel: uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Apr  2 23:08:43 FreeNAS kernel: uhub0: 2 ports with 2 removable, self powered
Apr  2 23:08:43 FreeNAS kernel: uhub1: 2 ports with 2 removable, self powered
Apr  2 23:08:43 FreeNAS kernel: uhub2: 2 ports with 2 removable, self powered
Apr  2 23:08:43 FreeNAS kernel: uhub3: 6 ports with 6 removable, self powered
Apr  2 23:08:43 FreeNAS kernel: ada0 at ata0 bus 0 scbus0 target 0 lun 0
Apr  2 23:08:43 FreeNAS kernel: ada0: <IC35L060AVV207-0 V22OA66A> ATA-6 device
Apr  2 23:08:43 FreeNAS kernel: ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
Apr  2 23:08:43 FreeNAS kernel: ada0: 35748MB (73213650 512 byte sectors: 16H 63S/T 16383C)
Apr  2 23:08:43 FreeNAS kernel: ada1 at ata0 bus 0 scbus0 target 1 lun 0
Apr  2 23:08:43 FreeNAS kernel: ada1: <Hitachi HDP725050GLAT80 GM4OA42A> ATA-8 device
Apr  2 23:08:43 FreeNAS kernel: ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
Apr  2 23:08:43 FreeNAS kernel: ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
Apr  2 23:08:43 FreeNAS kernel: ada2 at ata1 bus 0 scbus1 target 0 lun 0
Apr  2 23:08:43 FreeNAS kernel: ada2: <MAXTOR STM3320820A 3.AAE> ATA-7 device
Apr  2 23:08:43 FreeNAS kernel: ada2: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
Apr  2 23:08:43 FreeNAS kernel: ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
Apr  2 23:08:43 FreeNAS kernel: ada3 at ata2 bus 0 scbus2 target 0 lun 0
Apr  2 23:08:43 FreeNAS kernel: ada3: <ST1000DM003-1CH162 CC44> ATA-8 SATA 3.x device
Apr  2 23:08:43 FreeNAS kernel: ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
Apr  2 23:08:43 FreeNAS kernel: ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
Apr  2 23:08:43 FreeNAS kernel: ada4 at ata3 bus 0 scbus3 target 0 lun 0
Apr  2 23:08:43 FreeNAS kernel: ada4: <ST1000DM003-1CH162 CC46> ATA-8 SATA 3.x device
Apr  2 23:08:43 FreeNAS kernel: ada4: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
Apr  2 23:08:43 FreeNAS kernel: ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
Apr  2 23:08:43 FreeNAS kernel: Trying to mount root from ufs:/dev/ufs/FreeNASs1a
Apr  2 23:08:43 FreeNAS kernel: WARNING: /data was not properly dismounted
Apr  2 23:08:43 FreeNAS kernel: ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
Apr  2 23:08:43 FreeNAS kernel: add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
Apr  2 23:08:43 FreeNAS kernel: ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Apr  2 23:08:43 FreeNAS kernel: Consider tuning vm.kmem_size and vm.kmem_size_max
Apr  2 23:08:43 FreeNAS kernel: in /boot/loader.conf.
Apr  2 23:08:43 FreeNAS kernel: ZFS filesystem version 5
Apr  2 23:08:43 FreeNAS kernel: ZFS storage pool version 28
Apr  2 23:08:43 FreeNAS root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Apr  2 23:08:44 FreeNAS ntpd[1939]: ntpd 4.2.4p5-a (1)
Apr  2 23:08:51 FreeNAS ntpd[1940]: kernel time sync status change 2001
Apr  2 23:09:08 FreeNAS avahi-daemon[2530]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Apr  2 23:09:08 FreeNAS afpd[2542]: AFP/TCP started, advertising 192.168.0.12:548 (2.2.3)
Apr  2 23:09:09 FreeNAS INADYN[2604]: I:INADYN: IP address for alias 'indirizzo-ip.biz' needs update to 'indirizzo-ip.biz'
Apr  2 23:09:10 FreeNAS INADYN[2604]: I:INADYN: Alias 'indirizzo-ip.biz' to IP 'indirizzo-ip.biz' updated successful.

è l'unico che si avvicina all'ora dell'ultimo crash, ma non sono sicuro che sia quello giusto.

valesan · Apr 3, 2013

Mi sono ricordato leggendo nel forum in lingua inglese dove viene memorizzato il file di log ... In RAM !!
Purtroppo freenas lavora sempre in ram dopo l'avvio e quindi al reboot i log vengono riscritti da zero ;)

Leggi quà, cinsigliano di utilizzare il comando tail ma non conosco bene la sintassi, vedi se ci tiri fuori qualcosa
http://forums.freenas.org/showthrea...e-after-a-system-crash&highlight=Setup+syslog

fefele · Apr 3, 2013

fefele said:
hello guys, I have the same problem. if I transfer many data-files over the network, after a few minutes freenas crashes. I have to turn off the system brutally! someone managed to record the log in a file? please answer me. Thank you.

scusate l'inglese maccheronico........ ;) ma è proprio il mio caso! grazie valesan. ora aspettiamo che la mela maturi......

M_a_X_Italy · Apr 4, 2013

La pasta-termoconduttiva invecchia e non trasferisce + come da nuova il calore alle alette di raffreddamento, ti consiglio di sostituirla

fefele · Apr 4, 2013

leggendo quà e là, ho preso spunti per altre ipotesi oltre a quella della ram:

scheda di rete non adeguata, ovvero nominalmente 10/100 ma in realtà con prestazioni più basse. questo potrebbe appesantire pesantemnte il chipset della schede di rete che surriscaldandosi perde il controllo e quindi il sistema crasha.

eccessivo carico del processore con conseguente spegnimento della macchina. proverò a sostituire la pasta come consigliato da M_a_X_Italy;

per la ram un amico mi ha consigliato di fare un memtest con una distrolinux live.

aspetto vostre

valesan · Apr 5, 2013

vai con il mem test con una distro linux live ;)

M_a_X_Italy · Apr 5, 2013

Facci sapere !!!

Important Announcement for the TrueNAS Community.

freenas crasha se lo stresso troppo

fefele

Explorer

slyferd

Contributor

fefele

Explorer

valesan

Patron

fefele

Explorer

valesan

Patron

fefele

Explorer

M_a_X_Italy

Patron

fefele

Explorer

valesan

Patron

M_a_X_Italy

Patron

Similar threads