Hi,
I'm running freenas under exsi 6.7 and this is for home use.
I've recently upgraded to 10gbe network using a mikrotik switch and Intel x520 da2 nics.
When I transfer from PC to Freenas I get speeds close to 500MB/s at the beginning but then this drops to 100MB/s and remains until completion.
I don't think it's a network issue as I transfer to another Windows VM and I get a constant 300-400MB/s.
I've done some digging and disabled autotune and removed all autotune parameters as suggested in some posts. But this has not helped.
Please can you let me know what other information I can provide and I will gladly do so.
Your help is appreciated.
Hardware:
Supermicro X10SrI
80GB Ram
IBM m1015
x520 da2
Intel xeon 8 Core processor
Freenas
48GB Ram
4x6TB WD Red (2 disk redundancy)
2x6TB WD Red (mirror)
I'm running freenas under exsi 6.7 and this is for home use.
I've recently upgraded to 10gbe network using a mikrotik switch and Intel x520 da2 nics.
When I transfer from PC to Freenas I get speeds close to 500MB/s at the beginning but then this drops to 100MB/s and remains until completion.
I don't think it's a network issue as I transfer to another Windows VM and I get a constant 300-400MB/s.
I've done some digging and disabled autotune and removed all autotune parameters as suggested in some posts. But this has not helped.
Please can you let me know what other information I can provide and I will gladly do so.
Your help is appreciated.
Hardware:
Supermicro X10SrI
80GB Ram
IBM m1015
x520 da2
Intel xeon 8 Core processor
Freenas
48GB Ram
4x6TB WD Red (2 disk redundancy)
2x6TB WD Red (mirror)