MrUnknownEMC
Explorer
- Joined
- Feb 20, 2016
- Messages
- 55
Hi, i just got email regarding one of my ZFS array, at first i thought my drive had died. After stopping my server and remove the affect drive to check if it works on another computer. It worked perfectly and i check smart data and show no problem/errors. It is problem the drive? Should i replace it ASAP? So I rebooted back into freenas and re check the cable and found out the drive show up again on drives list. Could the problem be the power cable? Maybe the drive power cycled?
My ZFS results:
My short smart logs on the affect drive.
My ZFS results:
Code:
zpool status pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h6m with 0 errors on Fri Oct 27 03:51:05 2017 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors pool: volume1 state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://illumos.org/msg/ZFS-8000-2Q scan: scrub repaired 0 in 4h48m with 0 errors on Sun Oct 8 04:48:49 2017 config: NAME STATE READ WRITE CKSUM volume1 DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 4410447761725274727 UNAVAIL 0 0 0 was /dev/gptid/35a61c0a-c77a-11e6-8a11-3085a991bbbd.eli gptid/369808cc-c77a-11e6-8a11-3085a991bbbd.eli ONLINE 0 0 0 errors: No known data errors pool: volume2 state: ONLINE scan: scrub repaired 0 in 3h47m with 0 errors on Sun Oct 1 03:47:39 2017 config: NAME STATE READ WRITE CKSUM volume2 ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/9674e2bf-44d9-11e7-9dc9-3085a991bbbd.eli ONLINE 0 0 0 gptid/9741d636-44d9-11e7-9dc9-3085a991bbbd.eli ONLINE 0 0 0 errors: No known data errors
My short smart logs on the affect drive.
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68EUZN0 Serial Number: WD-WCAZAL399204 LU WWN Device Id: 5 0014ee 2081f3d29 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Nov 3 14:08:21 2017 AEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (37680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 363) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 189 162 021 Pre-fail Always - 5516 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 176 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 14810 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 176 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 98 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 938614 194 Temperature_Celsius 0x0022 115 105 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14796 - # 2 Short offline Completed without error 00% 14772 - # 3 Extended offline Interrupted (host reset) 60% 14750 - # 4 Short offline Completed without error 00% 14724 - # 5 Short offline Completed without error 00% 14700 - # 6 Short offline Completed without error 00% 14676 - # 7 Short offline Completed without error 00% 14652 - # 8 Short offline Completed without error 00% 14628 - # 9 Short offline Completed without error 00% 14604 - #10 Short offline Completed without error 00% 14580 - #11 Short offline Completed without error 00% 14556 - #12 Extended offline Completed without error 00% 14539 - #13 Short offline Completed without error 00% 14508 - #14 Short offline Completed without error 00% 14485 - #15 Short offline Completed without error 00% 14461 - #16 Short offline Completed without error 00% 14437 - #17 Short offline Completed without error 00% 14413 - #18 Short offline Completed without error 00% 14389 - #19 Short offline Completed without error 00% 14364 - #20 Short offline Completed without error 00% 14340 - #21 Short offline Completed without error 00% 14316 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.