I yesterday noted the below errors in my system alerts:
The scrub completed following a reboot and now I have the following errors - as can be seen the number of unreadable sectors has increased:
Running a smart test for the affected drive results in the below readout - do I need to start looking at replacing the drive?
Any help gratefully received since I don't know the threshold for replacement. Research of these forums and the first post here in particular suggests I might have an issue.
Please let me know if any other information is needed. Many thanks!
CRITICAL: March 12, 2018, 10:07 p.m. - Device: /dev/ada2, 2 Currently unreadable (pending) sectorsThe scrub completed following a reboot and now I have the following errors - as can be seen the number of unreadable sectors has increased:
Code:
CRITICAL: March 13, 2018, 12:08 a.m. - Device: /dev/ada2, not capable of SMART self-check CRITICAL: March 13, 2018, 12:08 a.m. - Device: /dev/ada2, failed to read SMART Attribute Data CRITICAL: March 13, 2018, 12:08 a.m. - Device: /dev/ada2, Read SMART Self-Test Log Failed CRITICAL: March 13, 2018, 12:08 a.m. - Device: /dev/ada2, Read SMART Error Log Failed CRITICAL: March 13, 2018, 9:22 p.m. - Device: /dev/ada2, 12 Currently unreadable (pending) sectors CRITICAL: March 13, 2018, 10:22 p.m. - Device: /dev/ada2, Self-Test Log error count increased from 0 to 1 CRITICAL: March 13, 2018, 12:02 a.m. - The volume Njord-pool state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
Running a smart test for the affected drive results in the below readout - do I need to start looking at replacing the drive?
Any help gratefully received since I don't know the threshold for replacement. Research of these forums and the first post here in particular suggests I might have an issue.
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68N32N0 Serial Number: WD- LU WWN Device Id: 5 0014ee 26407a93b Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Mar 13 22:30:20 2018 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 117) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (44160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 468) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 164 143 051 Pre-fail Always - 1467 3 Spin_Up_Time 0x0027 177 177 021 Pre-fail Always - 6108 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5545 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 123 115 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 12 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 199 199 000 Old_age Offline - 616 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 50% 5545 4145480 # 2 Short offline Completed: read failure 90% 5544 1590694559 # 3 Extended offline Completed without error 00% 5376 - # 4 Extended offline Completed without error 00% 5352 - # 5 Extended offline Completed without error 00% 5016 - # 6 Extended offline Completed without error 00% 4704 - # 7 Extended offline Completed without error 00% 4609 - # 8 Extended offline Completed without error 00% 4273 - # 9 Extended offline Completed without error 00% 3961 - #10 Extended offline Completed without error 00% 3865 - #11 Extended offline Completed without error 00% 3529 - #12 Extended offline Completed without error 00% 3218 - #13 Extended offline Completed without error 00% 3146 - #14 Extended offline Completed without error 00% 2810 - #15 Extended offline Completed without error 00% 2498 - #16 Extended offline Completed without error 00% 2402 - #17 Extended offline Completed without error 00% 2066 - #18 Extended offline Completed without error 00% 1754 - #19 Extended offline Completed without error 00% 1682 - #20 Extended offline Completed without error 00% 1347 - #21 Extended offline Completed without error 00% 1035 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Please let me know if any other information is needed. Many thanks!
