KenY21
Dabbler
- Joined
- Mar 26, 2017
- Messages
- 17
Hei, everyone,
On my FreeNAS box (v9.10.2-U6) I had two 3TB drives in Mirror. Both where:
Now one of the drives failed, I offline it, shutdown box and comparing S/N from S.M.A.R.T. took out the failed drive. At this point, I wanted to buy the new drive with the same vendor, model, capacity, but unfortunately, they are out of stack. I'm worried, that the new drive, that I will buy will have lower block counts (actual disk size), and there will be insufficient space to resilver. Is it possible? Or all 3TB drives will work?
I'm planning to buy this one:
On my FreeNAS box (v9.10.2-U6) I had two 3TB drives in Mirror. Both where:
Code:
Western Digital Black 3TB 7200RPM SATA3 64MB WD3003FZEX
Now one of the drives failed, I offline it, shutdown box and comparing S/N from S.M.A.R.T. took out the failed drive. At this point, I wanted to buy the new drive with the same vendor, model, capacity, but unfortunately, they are out of stack. I'm worried, that the new drive, that I will buy will have lower block counts (actual disk size), and there will be insufficient space to resilver. Is it possible? Or all 3TB drives will work?
I'm planning to buy this one:
Code:
SEAGATE BARRACUDA 7200 3TB SATA 64MB ST3000DM001