HP desktop
Motherboard IPM61-TB
Intel Core i3-3220T (Ivy Bridge) 2.8 GHz Dual Core
8GB PC3-10600 (DDR3-1333)
16GB DataStick PRO by CENTON (to boot from)
Internal Laptop HHD 150GB SATAII (to boot from)
So I'm looking to run FreeNAS on the above hardware. Aside from the USB stick and HDD, it's all factory from an HP desktop that's about 12 months old. Everything appears to fail within acceptable hardware recommendations, please correct me if I'm wrong here.
I burnt the latest ISO to CD and followed the install process without issue. Everything appears to work as expected and matches on line documentation and various YouTube videos I've researched. However, after I remove CD and reboot, computer fails to find boot device.
I've attempted the following, however nothing has worked so far:
1. boot to USB stick YUMI installed which works - done to verify USB booting is working.
2. Replaced USB stick with Kingston 32GB stick - same result after reboot.
3. Re-downloaded and installed from 2nd USB stick - same result after reboot.
4. Completed fresh install process to internal HDD to test - same result
4. Changed the following options within BIOS using various different setups:
a. Turn off UEFI Boot security and booted to Legacy Devices
b. Adjusted Boot order
c. Disconnected all internal HDD, fresh install to USB, and attempted the above BIOS changes - same result.
Any suggestions would be greatly appreciated.
Thank you for your time.
Motherboard IPM61-TB
Intel Core i3-3220T (Ivy Bridge) 2.8 GHz Dual Core
8GB PC3-10600 (DDR3-1333)
16GB DataStick PRO by CENTON (to boot from)
Internal Laptop HHD 150GB SATAII (to boot from)
So I'm looking to run FreeNAS on the above hardware. Aside from the USB stick and HDD, it's all factory from an HP desktop that's about 12 months old. Everything appears to fail within acceptable hardware recommendations, please correct me if I'm wrong here.
I burnt the latest ISO to CD and followed the install process without issue. Everything appears to work as expected and matches on line documentation and various YouTube videos I've researched. However, after I remove CD and reboot, computer fails to find boot device.
I've attempted the following, however nothing has worked so far:
1. boot to USB stick YUMI installed which works - done to verify USB booting is working.
2. Replaced USB stick with Kingston 32GB stick - same result after reboot.
3. Re-downloaded and installed from 2nd USB stick - same result after reboot.
4. Completed fresh install process to internal HDD to test - same result
4. Changed the following options within BIOS using various different setups:
a. Turn off UEFI Boot security and booted to Legacy Devices
b. Adjusted Boot order
c. Disconnected all internal HDD, fresh install to USB, and attempted the above BIOS changes - same result.
Any suggestions would be greatly appreciated.
Thank you for your time.