John Gorst
Dabbler
- Joined
- Dec 18, 2014
- Messages
- 15
FreeNAS-9.3-STABLE-201505130355 HP microserver N54L 8gb 2x3tb mirror, 1x 64gb ssd, 1x 8gb USB boot (SanDisk... can't remember type and still in system resilvering)
Overnight I got the error:
After 15 minutes I did a 'zpool status' to see how things are getting on
This seems a little slow to me?
Also the GUI was initially frozen with the 'waiting' box but has now exited before the boot drive has finished resilvering.
1) Is it normal for it to be this slow to resilver? Is this a sign of a problem with the device?
2) Will the appropriate GRUB boot 'magic' be installed automatically or will I need to do it manually, especially as the GUI exited before the resilvering was complete? (found this bug https://bugs.pcbsd.org/issues/6993 ) How can I check that GRUB is installed other than rebooting with only the one USB key installed.
3) Given I am resilvering from a 'dodgy' device, should I actually just make a fresh install on a pair of new USB keys and load on the saved config? (I am about to upgrade to a better box HP DL160 G6, so that may be a good time to do a fresh install?)
4) Which log file is error from SRUBS saved to. I can't find any mention of a bad Scrub to find out exactly what the issue was.
Thanks for any pointers
edit: Things have now speeded up, hopefully all will be good!
Overnight I got the error:
The boot volume state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
I saved the configuration and I have started the process of adding a mirrored USB key to the freenas-boot which I have been meaning to do for ages.
After 15 minutes I did a 'zpool status' to see how things are getting on
Code:
pool: freenas-boot state: ONLINE status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Mon Jun 15 10:20:06 2015 6.51M scanned out of 5.60G at 26.6K/s, 61h8m to go 5.61M resilvered, 0.11% done config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/93c72004-86a2-11e4-a1fc-a0b3ccdf0943 ONLINE 0 0 1 da1p2 ONLINE 0 0 0 (resilvering)
This seems a little slow to me?
Also the GUI was initially frozen with the 'waiting' box but has now exited before the boot drive has finished resilvering.
1) Is it normal for it to be this slow to resilver? Is this a sign of a problem with the device?
2) Will the appropriate GRUB boot 'magic' be installed automatically or will I need to do it manually, especially as the GUI exited before the resilvering was complete? (found this bug https://bugs.pcbsd.org/issues/6993 ) How can I check that GRUB is installed other than rebooting with only the one USB key installed.
3) Given I am resilvering from a 'dodgy' device, should I actually just make a fresh install on a pair of new USB keys and load on the saved config? (I am about to upgrade to a better box HP DL160 G6, so that may be a good time to do a fresh install?)
4) Which log file is error from SRUBS saved to. I can't find any mention of a bad Scrub to find out exactly what the issue was.
Thanks for any pointers
edit: Things have now speeded up, hopefully all will be good!
Code:
pool: freenas-boot state: ONLINE status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Mon Jun 15 10:20:06 2015 1.11G scanned out of 5.60G at 668K/s, 1h57m to go 1.11G resilvered, 19.77% done config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/93c72004-86a2-11e4-a1fc-a0b3ccdf0943 ONLINE 0 0 1 da1p2 ONLINE 0 0 0 (resilvering) errors: No known data errors