I just noticed an alert Device: /dev/da2 [SAT], Self-Test Log error count increased from 0 to 1. Is my drive failing?
Code:
########## SMART status report for da2 drive (Western Digital Red: WD-WCC*******) ########## smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) SMART overall-health self-assessment test result: PASSED ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 177 167 021 Pre-fail Always - 8125 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 192 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23182 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 156 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 98 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 771 194 Temperature_Celsius 0x0022 124 110 000 Old_age Always - 28 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 2 No Errors Logged Test_Description Status Remaining LifeTime(hours) LBA_of_first_error Extended offline Completed: read failure 10% 23151 3261243016