Hi
I have a VM with Freenas on ESXi5.1 The SATA Conroller (Marvell 88SE9172) comes through the ESXi passthrough feature to the Freenas VM. The Mainborad is the Intel DZ77GA-70K with a secondary Marvell 88SE9172 Controller.
VT-d support is available.
The Freenas get access to the SATA Controller.
ahci0@pci0:3:0:0: class=0x010601 card=0x20378086 chip=0x91721b4b rev=0x11 hdr=0x00
class = mass storage
subclass = SATA
ahci1@pci0:11:0:0: class=0x010601 card=0x20378086 chip=0x91721b4b rev=0x11 hdr=0x00
class = mass storage
subclass = SATA
However the both disks behind the SATA Controller are not visible. However it is a known bug:
http://www.freebsd.org/cgi/query-pr.cgi?pr=157281
My question is, how can I add this patch?
Thanks.
Oli
I have a VM with Freenas on ESXi5.1 The SATA Conroller (Marvell 88SE9172) comes through the ESXi passthrough feature to the Freenas VM. The Mainborad is the Intel DZ77GA-70K with a secondary Marvell 88SE9172 Controller.
VT-d support is available.
The Freenas get access to the SATA Controller.
ahci0@pci0:3:0:0: class=0x010601 card=0x20378086 chip=0x91721b4b rev=0x11 hdr=0x00
class = mass storage
subclass = SATA
ahci1@pci0:11:0:0: class=0x010601 card=0x20378086 chip=0x91721b4b rev=0x11 hdr=0x00
class = mass storage
subclass = SATA
However the both disks behind the SATA Controller are not visible. However it is a known bug:
http://www.freebsd.org/cgi/query-pr.cgi?pr=157281
My question is, how can I add this patch?
Thanks.
Oli