fenglin911a
Cadet
- Joined
- Jul 24, 2013
- Messages
- 5
Hello, I am new for freenas.
FreeNAS Build FreeNAS-8.0.1-RELEASE-amd64 (8081)
Drives are in a Z2+0 array (RAID 60) Drives are in two 8 drive z2 arrays which are striped together
The problem is one of the disks was failed and we couldn't start the server, so we removed the disk and the server can boot normally. but it shows the alert : The volume XX (ZFS) status is DEGRADED
Then we bought a new drive and I just insert it to the server.
Now from the gui-zpool status, this disk here show UNAVAIL
raidz2 ONLINE
and from view disks here show unknown.
9 Unknown {uuid}d72afb6a-fb67-11e0-a755-0025905333f0 Member of mega raidz21 Auto Always On Disabled Disabled true
How should I do to see the new disk and replace it?
FreeNAS Build FreeNAS-8.0.1-RELEASE-amd64 (8081)
Drives are in a Z2+0 array (RAID 60) Drives are in two 8 drive z2 arrays which are striped together
The problem is one of the disks was failed and we couldn't start the server, so we removed the disk and the server can boot normally. but it shows the alert : The volume XX (ZFS) status is DEGRADED
Then we bought a new drive and I just insert it to the server.
Now from the gui-zpool status, this disk here show UNAVAIL
raidz2 ONLINE
da0p2 ONLINE
da1p2 ONLINE
da2p2 ONLINE
da3p2 ONLINE
da4p2 ONLINE
da5p2 ONLINE
da6p2 ONLINE
da7p2 ONLINE
raidz2 DEGRADED
4970748511577484581 UNAVAIL
da8p2 ONLINE
da9p2 ONLINE
da10p2 ONLINE
da11p2 ONLINE
da12p2 ONLINE
da13p2 ONLINE
da14p2 ONLINEand from view disks here show unknown.
9 Unknown {uuid}d72afb6a-fb67-11e0-a755-0025905333f0 Member of mega raidz21 Auto Always On Disabled Disabled true
How should I do to see the new disk and replace it?