I have a new 10TB hard drive that I shucked from WD external drive. When I install the drive in my server running Freenas 11.2, it is not recognized at all (all other drives are recognized although they are all smaller than the 10TB drive). (dmesg | grep -e ada )does not show the drive. However, when I re-assemble the drive as an external drive and plug the USB into the same server running FreeNAS, it is recognized. I have swapped cables and other "new" drives are recognized but not the 10TB drive to make sure the cables are not the culprit. I need help determining what may be wrong.