Tnofuentes
Cadet
- Joined
- Feb 18, 2020
- Messages
- 2
Hey all,
I was toying around with adding a GPU to my rig (I know, I know) and since I had one laying around I decided to try it out. My LSI HBA was in the 16x slot, so I moved it down to the 4x slot and installed the GPU. While I'm researching how pointless what I'd just done was I also noticed that my main storage pool wasn't showing up. I assumed it didn't like the move, and knowing how pointless it was, I swapped it back and pulled the GPU. And . . . nada.
This is a Dell T20 with an E3-1265L, 16GB of RAM, an LSI 9211-8i preflashed to IT mode and carrying 4 10TB disks. One SSD and one HD are connected to the Mobo and those appear without issue. Below is the output from pciconf, which does not show the LSI. I reseated it and reseated the SAS end and the SATA ends of the cable and still no tone. Did I bork my LSI? Will the pool reload intact if I replace the card? Should I start freaking out? Thanks in advance.
I was toying around with adding a GPU to my rig (I know, I know) and since I had one laying around I decided to try it out. My LSI HBA was in the 16x slot, so I moved it down to the 4x slot and installed the GPU. While I'm researching how pointless what I'd just done was I also noticed that my main storage pool wasn't showing up. I assumed it didn't like the move, and knowing how pointless it was, I swapped it back and pulled the GPU. And . . . nada.
This is a Dell T20 with an E3-1265L, 16GB of RAM, an LSI 9211-8i preflashed to IT mode and carrying 4 10TB disks. One SSD and one HD are connected to the Mobo and those appear without issue. Below is the output from pciconf, which does not show the LSI. I reseated it and reseated the SAS end and the SATA ends of the cable and still no tone. Did I bork my LSI? Will the pool reload intact if I replace the card? Should I start freaking out? Thanks in advance.
@freenas[~]# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x06201028 chip=0x0c088086 rev=0x06hdr=0x00
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3 Processor DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x06201028 chip=0x040a8086 rev=0x06hdr=0x00
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3 Processor Integrated Graphics Controller'
class = display
subclass = VGA
xhci0@pci0:0:20:0: class=0x0c0330 card=0x06201028 chip=0x8c318086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB xHCI'
class = serial bus
subclass = USB
none0@pci0:0:22:0: class=0x078000 card=0x06201028 chip=0x8c3a8086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family MEI Controller'
class = simple comms
uart2@pci0:0:22:3: class=0x070002 card=0x06201028 chip=0x8c3d8086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family KT Controller'
class = simple comms
subclass = UART
em0@pci0:0:25:0: class=0x020000 card=0x05a61028 chip=0x153a8086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection I217-LM'
class = network
subclass = ethernet
ehci0@pci0:0:26:0: class=0x0c0320 card=0x06201028 chip=0x8c2d8086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
pcib1@pci0:0:28:0: class=0x060400 card=0x06201028 chip=0x8c108086 rev=0xd4hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:1: class=0x060400 card=0x06201028 chip=0x8c128086 rev=0xd4hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x06201028 chip=0x8c268086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x06201028 chip=0x8c568086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = 'C226 Series Chipset Family Server Advanced SKU LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010400 card=0x06201028 chip=0x28228086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = 'SATA Controller [RAID mode]'
class = mass storage
subclass = RAID
none1@pci0:0:31:3: class=0x0c0500 card=0x06201028 chip=0x8c228086 rev=0x04hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus