Hey,
I tried to crossflash my new Dell H200 to IT following this guide:
https://techmattr.wordpress.com/201...-flashing-to-it-mode-dell-perc-h200-and-h310/
but for some reason I could not run:
(neither from DOS nor UEFI)
and for some reason I was able to run:
and after many tries also:
which means that now I don't have a SAS Address... :/
Is there anything I can/should do?
EDIT: I booted into FreeNAS and unlike before the drives connected to the H200 are being recognised... :)
I tried to crossflash my new Dell H200 to IT following this guide:
https://techmattr.wordpress.com/201...-flashing-to-it-mode-dell-perc-h200-and-h310/
but for some reason I could not run:
Code:
sas2flash{.efi} -c 0 -list
(neither from DOS nor UEFI)
and for some reason I was able to run:
Code:
megarec.exe -cleanflash 0
and after many tries also:
Code:
sas2flash_p19.efi -o -f 2118it.bin
which means that now I don't have a SAS Address... :/
Is there anything I can/should do?
EDIT: I booted into FreeNAS and unlike before the drives connected to the H200 are being recognised... :)
Last edited: