L6Fd77i6E
Cadet
- Joined
- Aug 2, 2017
- Messages
- 6
Hi, I would like to start by saying that I am pretty new to FREENAS,
I got it to learn more about it while also build VM lab plus other things.
I am in search of some assistance or some confirmation with what I believe it to be possibly bad Hard drives.
I say this base on following some of the suggestions on the forums while trying to troubleshoot the issue.
I would like to also add the NAS was working for a few months until it experience a few power outages.
I found this out months later since I work long hours and completely forgot about the box.
I bought the FreeNAS Mini from Amazon with the following Specs:
-2x8GB ECC 1600mhz memory
-4 x 1TB Western Digital Red HDD
-FreeNAS-9.3-STABLE-201503270027
I am able to access the Share files, but I don't know which files are corrupt.
I perform the following troubleshooting steps;
Below is the zpool information
Below is the full Smartctl output
smartctl_Results.txt
Hope the information provided is enough to get some ideas around the issue
thank you
I got it to learn more about it while also build VM lab plus other things.
I am in search of some assistance or some confirmation with what I believe it to be possibly bad Hard drives.
I say this base on following some of the suggestions on the forums while trying to troubleshoot the issue.
I would like to also add the NAS was working for a few months until it experience a few power outages.
I found this out months later since I work long hours and completely forgot about the box.
I bought the FreeNAS Mini from Amazon with the following Specs:
-2x8GB ECC 1600mhz memory
-4 x 1TB Western Digital Red HDD
-FreeNAS-9.3-STABLE-201503270027
I am able to access the Share files, but I don't know which files are corrupt.
I perform the following troubleshooting steps;
- SCRUB - [Did not clear the Waning.]
- SMART Short - [not sure if it found errors since I am not verse into reading the output]
- Memtest86+ - [found no errors]
Below is the zpool information
Code:
zpool status -v pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h0m with 0 errors on Sun Jul 30 03:45:22 2017 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 ada2p2 ONLINE 0 0 0 errors: No known data errors pool: myStrg state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://illumos.org/msg/ZFS-8000-8A scan: scrub repaired 0 in 0h49m with 1 errors on Tue Aug 1 23:29:19 2017 config: NAME STATE READ WRITE CKSUM myStrg DEGRADED 0 0 133 raidz1-0 DEGRADED 0 0 266 gptid/bbe5611e-dced-11e4-be08-d0509946c212 DEGRADED 0 0 0 too many errors gptid/bc63bede-dced-11e4-be08-d0509946c212 DEGRADED 0 0 0 too many errors gptid/bce279f3-dced-11e4-be08-d0509946c212 DEGRADED 0 0 0 too many errors gptid/bd5f829c-dced-11e4-be08-d0509946c212 ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: /var/db/system/syslog-a2c45a92fa844f5eb1a221847ae6e10f/log/debug.log
Below is the full Smartctl output
smartctl_Results.txt
Hope the information provided is enough to get some ideas around the issue
thank you
Attachments
Last edited: