Hello, New to the thread and forums but used many to do some self troubleshooting. I replaced multiple drives in my freenas because they were slowly dying and now have them all up and running with no corrupted data and such. I deleted all the files that were corrupted so that the pool can become clean but this is what i constantly get now.
I get the following constantly...
llumos Fault Management Architecture (FMA) Message Registry
Message: ZFS-8000-8A
this is the the file i find on zpool status -v in the attached picture.
how can i stop this ran smart tests, and scrubs and still nothing.
I get the following constantly...
llumos Fault Management Architecture (FMA) Message Registry
Message: ZFS-8000-8A
title | Corrupted data |
description | A file or directory could not be read due to corrupt data. |
severity | critical |
type | error |
keys | ereport.fs.zfs.object.corrupt_data |
details | The Message ID: ZFS-8000-8A indicates corrupted data exists in the current pool |
impact | The file or directory is unavailable. |
response | No automated response will be taken. |
action | Run 'zpool status -x' to determine which pool is damaged: # zpool status -x pool: test state: ONLINE status: One or more devices has experienced an error and no valid replicas are available. Some filesystem data is corrupt, and applications may have been affected. action: Destroy the pool and restore from backup. see: https://illumos.org/msg/ZFS-8000-8A scrub: none requested config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 2 c0t0d0 ONLINE 0 0 2 c0t0d1 ONLINE 0 0 0 errors: 1 data errors, use '-v' for a list Unfortunately, the data cannot be repaired, and the only choice to repair the data is to restore the pool from backup. Applications attempting to access the corrupted data will get an error (EIO), and data may be permanently lost. On recent versions of Illumos, the list of affected files can be retrieved by using the '-v' option to 'zpool status': # zpool status -xv pool: test state: ONLINE status: One or more devices has experienced an error and no valid replicas are available. Some filesystem data is corrupt, and applications may have been affected. action: Destroy the pool and restore from backup. see: https://illumos.org/msg/ZFS-8000-8A scrub: none requested config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 2 c0t0d0 ONLINE 0 0 2 c0t0d1 ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: /export/example/foo Damaged files may or may not be able to be removed depending on the type of corruption. If the corruption is within the plain data, the file should be removable. If the corruption is in the file metadata, then the file cannot be removed, though it can be moved to an alternate location. In either case, the data should be restored from a backup source. It is also possible for the corruption to be within pool-wide metadata, resulting in entire datasets being unavailable. If this is the case, the only option is to destroy the pool and re-create the datasets from backup. |
this is the the file i find on zpool status -v in the attached picture.
how can i stop this ran smart tests, and scrubs and still nothing.