freenas-supero
Contributor
- Joined
- Jul 27, 2014
- Messages
- 128
I have been experiencing this annoying issue since I upgraded to 9.10-STABLE. Basically I get these entries in dmesg once and a while (about 2x/week)
I have tried the following:
Service is configured as this:
UPS Mode: Master
IdentifierL APCBR1500G
Driver: APC ups 2 Back-UPS Pro USB USB (usbhid-ups)
Port: /dev/ugen1.3
Monitor user: upsmon
Monitor Password: fixmepass
Freenas: FreeNAS-9.10.1 (d989edd)
Whats wrong?
Sep 17 08:53:24 freenas upsd[57509]: Data for UPS [APCBR1500G] is stale - check driver
Sep 17 08:53:25 freenas upsd[57509]: UPS [APCBR1500G] data is no longer stale
I have tried the following:
- Changing USB port (on the server);
- Double checking USB port number (ugen1.3) was the right one in the UPS service:
Code:
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.3: <Back-UPS BR1500G FW865.L2 .D USB FWL2 American Power Conversion> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA) ugen0.3: <Hermon USB hidmouse Device Winbond Electronics Corp> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) ugen0.4: <USB 2.0 Hub vendor 0x1a40> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.5: <USB Flash Drive Lexar> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen0.6: <DataTraveler 3.0 Kingston> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
Service is configured as this:
UPS Mode: Master
IdentifierL APCBR1500G
Driver: APC ups 2 Back-UPS Pro USB USB (usbhid-ups)
Port: /dev/ugen1.3
Monitor user: upsmon
Monitor Password: fixmepass
Freenas: FreeNAS-9.10.1 (d989edd)
Whats wrong?