Ascheriit06
Cadet
- Joined
- Jul 19, 2016
- Messages
- 2
Hi,
I know several people have already mentioned such issue.
I have quite often the message :
freenas smartd[2524]: Device: /dev/ada2, 216 Currently unreadable (pending) sectors
Here is what I did.
smartctl -t long /dev/ada2
Then, once done
smartctl -a /dev/ada2
It seems the long test didn't return any errors.
But when I run
smartctl -A /dev/ada2
I got
I am out of idea.
Any information what I should do or check ?
Thanks in advance.
Kind regards
I know several people have already mentioned such issue.
I have quite often the message :
freenas smartd[2524]: Device: /dev/ada2, 216 Currently unreadable (pending) sectors
Here is what I did.
smartctl -t long /dev/ada2
Then, once done
smartctl -a /dev/ada2
Code:
[root@freenas] ~# smartctl -a /dev/ada2 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s) Device Model: WDC WD30EZRX-00DC0B0 Serial Number: WD-WCC1T1441318 LU WWN Device Id: 5 0014ee 25e0ebbe9 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 19 08:42:27 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 390) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 156 021 Pre-fail Always - 6191 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23153 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12 193 Load_Cycle_Count 0x0032 046 046 000 Old_age Always - 462034 194 Temperature_Celsius 0x0022 112 105 000 Old_age Always - 38 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 216 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 23148 - # 2 Extended offline Completed without error 00% 23082 - # 3 Short offline Completed without error 00% 23051 - # 4 Short offline Completed without error 00% 23027 - # 5 Extended offline Completed without error 00% 23010 - # 6 Short offline Completed without error 00% 22979 - # 7 Short offline Completed without error 00% 22955 - # 8 Short offline Completed without error 00% 22931 - # 9 Extended offline Completed without error 00% 22914 - #10 Short offline Completed without error 00% 22883 - #11 Short offline Completed without error 00% 22859 - #12 Extended offline Completed without error 00% 22842 - #13 Short offline Completed without error 00% 22811 - #14 Short offline Completed without error 00% 22787 - #15 Short offline Completed without error 00% 22763 - #16 Extended offline Completed without error 00% 22746 - #17 Short offline Completed without error 00% 22715 - #18 Short offline Completed without error 00% 22691 - #19 Extended offline Completed without error 00% 22674 - #20 Short offline Completed without error 00% 22643 - #21 Short offline Completed without error 00% 22619 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
It seems the long test didn't return any errors.
But when I run
smartctl -A /dev/ada2
I got
Code:
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 156 021 Pre-fail Always - 6191 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 23165 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 193 Load_Cycle_Count 0x0032 046 046 000 Old_age Always - 462034 194 Temperature_Celsius 0x0022 113 105 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 216 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
I am out of idea.
Any information what I should do or check ?
Thanks in advance.
Kind regards