Cheejyg
Dabbler
- Joined
- Dec 11, 2016
- Messages
- 31
FreeNAS Version: 9.10.2
Hardware details:
Everything was working fine until I tried setting up LACP, lagg0, with the 2 onboard NIC(s), igb0 and igb1, in the WebGUI.
After I clicked "Apply", the Web interface hanged so ... EDIT: I configured the Link Aggregation in the "Console setup" menu instead. But it still wasn't working then I deleted the lagg0 interface in the "Console setup" menu and I reconfigured the Link Aggregation then ... I restarted the system with the "Console setup" menu instead, option 13.
After it rebooted, I keep getting an endless stream of the "Console menu" being echo-ed on the screen, I cannot access the WebGUI nor the Shell as I am unable to input anything.
I have tried:
Thank you!
EDIT: There is probably a bug somewhere in either the "Console setup" menu or the WebGUI when creating/deleting/configuring Link Aggregation interfaces
Hardware details:
- Motherboard: ASUS P10S WS
- Processor: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz
- RAM: 2 × Kingston(R) ValueRAM(R) 8GB 2133 ECC
- 4 × Western Digital 4TB Red drives in RAIDZ2 configuration
- 1 × ADATA 240GB SSD for ZIL/ARC/Cache drive
Everything was working fine until I tried setting up LACP, lagg0, with the 2 onboard NIC(s), igb0 and igb1, in the WebGUI.
After I clicked "Apply", the Web interface hanged so ... EDIT: I configured the Link Aggregation in the "Console setup" menu instead. But it still wasn't working then I deleted the lagg0 interface in the "Console setup" menu and I reconfigured the Link Aggregation then ... I restarted the system with the "Console setup" menu instead, option 13.
After it rebooted, I keep getting an endless stream of the "Console menu" being echo-ed on the screen, I cannot access the WebGUI nor the Shell as I am unable to input anything.
I have tried:
- Physically disconnecting the network cables and rebooted but it didn't work.
- Manually disabling the network interfaces on the motherboard in BIOS and rebooted but it didn't work.
- Tried booting into "Verbose Mode" in the boot environment menu but gets stuck in the "Console setup" loop.
- Tried booting into "Single User Mode" in the boot environment menu but it gets stuck at "Trying to mount root from zfs:freenas-boot/ROOT/9.10.2 []..."
- Booting into older version, 9.10.1-U4, in the boot environment menu works but that's about all I can do from there.
Thank you!
EDIT: There is probably a bug somewhere in either the "Console setup" menu or the WebGUI when creating/deleting/configuring Link Aggregation interfaces
Last edited: