bsodmike
Dabbler
- Joined
- Sep 5, 2017
- Messages
- 22
Hi all,
I just wanted to double check that my ECC memory is working and checked via dmidecode, and it is listed fine,
Just showing one of the sticks, there's 16GB x2.
Quick summary -
Even went through an older thread https://www.ixsystems.com/community/threads/ecc-working-single-multi-bit-testing-ecc-ram.72668/ but did not want to bump it.
grepped through `/var/log/messages` but couldn't find any ECC reports. Thoughts?
I just wanted to double check that my ECC memory is working and checked via dmidecode, and it is listed fine,
Just showing one of the sticks, there's 16GB x2.
Quick summary -
Code:
# dmidecode -t memory # dmidecode 3.1 Scanning /dev/mem for entry point. SMBIOS 3.0 present. Handle 0x0058, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 512 GB Error Information Handle: Not Provided Number Of Devices: 8 Handle 0x005C, DMI type 17, 40 bytes Memory Device Array Handle: 0x0058 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 72 bits Size: 16384 MB Form Factor: RIMM Set: None Locator: DIMM_B1 Bank Locator: NODE 1 Type: DDR4 Type Detail: Synchronous Speed: 2133 MT/s Manufacturer: Micron Serial Number: REDACTED Asset Tag: DIMM_B1_AssetTag Part Number: 36ASF2G72PZ-2G1B1 Rank: 2 Configured Clock Speed: 2133 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown
Even went through an older thread https://www.ixsystems.com/community/threads/ecc-working-single-multi-bit-testing-ecc-ram.72668/ but did not want to bump it.
grepped through `/var/log/messages` but couldn't find any ECC reports. Thoughts?