I just start to learn FreeNAS. I am having trouble to create a Lagg interface. In the pop-up window to add lagg interface there is no NIC's show up for selection.
I am using 8.0.3. I read the PDF manual of 8.0.2 and tried to enable the NICs. So first I checked my system:
em0: Intel PRO 1000 PL 82573L (addon card)
em1: Intel 82541PI (onboard)
I also managed to edited both /boot/default/loader.conf and /boot/loader.conf, make sure has:
if_em_load="YES"
But I still don't see and NICs for me to add as Lagg interface.
Please help. Thanks!
===================
My NICs info:
em0@pci0:4:0:0: class=0x020000 card=0x30a58086 chip=0x109a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel PRO/1000 PL Network Adaptor (82573L)'
class = network
subclass = ethernet
em1@pci0:5:0:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
class = network
subclass = ethernet
I am using 8.0.3. I read the PDF manual of 8.0.2 and tried to enable the NICs. So first I checked my system:
em0: Intel PRO 1000 PL 82573L (addon card)
em1: Intel 82541PI (onboard)
I also managed to edited both /boot/default/loader.conf and /boot/loader.conf, make sure has:
if_em_load="YES"
But I still don't see and NICs for me to add as Lagg interface.
Please help. Thanks!
===================
My NICs info:
em0@pci0:4:0:0: class=0x020000 card=0x30a58086 chip=0x109a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel PRO/1000 PL Network Adaptor (82573L)'
class = network
subclass = ethernet
em1@pci0:5:0:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
class = network
subclass = ethernet