I'm using FreeNAS-11.2-U5 (c129415c52). I can connect to my NFS shares just fine using NFSv3, but get the unhelpful "Input/Output Error" on the client machine (running Bionic) when I try to connect using v4. I have v4 enabled in the GUI. I started debugging and it appears that v4 is indeed not running:
I did a little digging into the FreeNAS configs to see if I could identify something wrong but have struck out. I saw it reads from the sqllite config database so I opened it up but the appropriate column is set to true. I don't know where to look next, so your help would be very much appreciated.
Code:
# rpcinfo -p program vers proto port service 100000 2 tcp 111 rpcbind 100000 2 udp 111 rpcbind 100000 2 local 111 rpcbind 100000 3 tcp 111 rpcbind 100000 3 udp 111 rpcbind 100000 3 local 111 rpcbind 100000 4 tcp 111 rpcbind 100000 4 udp 111 rpcbind 100000 4 local 111 rpcbind 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100005 1 tcp 943 mountd 100005 1 udp 943 mountd 100005 3 tcp 943 mountd 100005 3 udp 943 mountd 100021 0 tcp 1001 nlockmgr 100021 0 udp 603 nlockmgr 100021 1 tcp 1001 nlockmgr 100021 1 udp 603 nlockmgr 100021 3 tcp 1001 nlockmgr 100021 3 udp 603 nlockmgr 100021 4 tcp 1001 nlockmgr 100021 4 udp 603 nlockmgr 100024 1 tcp 976 status 100024 1 udp 976 status
I did a little digging into the FreeNAS configs to see if I could identify something wrong but have struck out. I saw it reads from the sqllite config database so I opened it up but the appropriate column is set to true. I don't know where to look next, so your help would be very much appreciated.