Can't connect to AD in 9.3 anymore

[pmsys]

Hi all,

I had a domaincontroller running on a specific IP inside a VBox-instance on my FreeNas-instance.
I used the "DirectoryService" -> "Active Directory" functionality.
My problem was that everytime I rebooted the Nas I had to reconnect to that DC.
However, my FreeNas was connected to this AD and all was running fine.

A few weeks ago I moved the DC to a seperate machine outside my FreeNas-instance (with new IP).
Up from this point I was not able to connect the AD anymore.

Everytime time I tried to save the settings I always got this error-string: "{'info': 'invalid DN', 'desc': 'Invalid DN syntax'}."
I tried to set an incorrect Domain-name (as a test) and I got what I was expecting:"Unable to find domain controllers for lan.pm".

Now I don't know if this is a FreeNas-issue or if there is another problem.
I use the "Univention Corporate Server" as DC. The configuration is the same as in the old instance.


Thanks for advice.

 

[dlavigne]

Which build of FreeNAS (from System -> Information)?

Do you get any errors if you run the commands listed in http://doc.freenas.org/9.3/freenas_directoryservice.html#if-the-system-will-not-join-the-domain?

 

[pmsys]

Sorry for my late answer.

I figured out that there is some issue on my DC.
So I will reinstall my DC.

Then I will see if it's working again...

 

[berbox]

I would like to hear if / how you got this setup working as I'm struggling with the same problem.