Ok, I have read sooooo much. I am willing to read more if you point me somewhere. I even found a few threads with this same title (very similar.) But I still can't resolve my situation.
FreeNAS-9.2.1.6-RELEASE-x64 (ddd1e39)
Intel(R) Xeon(R) CPU E3-1226 v3 @ 3.30GHz
32402MB (ECC)
I have 6x2TB:
I *think* i bumped the cable when I put the cover back on the case. The drive *disappeared*. I shutdown and changed the cable. Now the drive is *there*. But I am unable to Online it or whatever. I scrubbed it and I did Online it, but none of that changed the status of UNAVAIL.
Tried to online it:
And the drive info:
So, should I just hit the "replace" button and see if it brings it back?
FreeNAS-9.2.1.6-RELEASE-x64 (ddd1e39)
Intel(R) Xeon(R) CPU E3-1226 v3 @ 3.30GHz
32402MB (ECC)
I have 6x2TB:
Code:
[root@freenas] ~# zpool status pool: Deerhaven1 state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://illumos.org/msg/ZFS-8000-2Q scan: scrub repaired 0 in 0h7m with 0 errors on Sat Aug 9 20:14:20 2014 config: NAME STATE READ WRITE CKSUM Deerhaven1 DEGRADED 0 0 0 raidz2-0 DEGRADED 0 0 0 gptid/38009294-1dcb-11e4-82ae-d05099013a39.eli ONLINE 0 0 0 6630984596155414364 UNAVAIL 0 0 0 was /dev/gptid/38b76d59-1dcb-11e4-82ae-d05099013a39.eli gptid/3965262b-1dcb-11e4-82ae-d05099013a39.eli ONLINE 0 0 0 gptid/3a143aab-1dcb-11e4-82ae-d05099013a39.eli ONLINE 0 0 0 gptid/3ac8051b-1dcb-11e4-82ae-d05099013a39.eli ONLINE 0 0 0 gptid/3b79f677-1dcb-11e4-82ae-d05099013a39.eli ONLINE 0 0 0 errors: No known data errors
I *think* i bumped the cable when I put the cover back on the case. The drive *disappeared*. I shutdown and changed the cable. Now the drive is *there*. But I am unable to Online it or whatever. I scrubbed it and I did Online it, but none of that changed the status of UNAVAIL.
Code:
[root@freenas] ~# camcontrol devlist <WDC WD20EFRX-68EUZN0 80.00A80> at scbus5 target 0 lun 0 (ada0,pass0) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus6 target 0 lun 0 (ada1,pass1) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus7 target 0 lun 0 (ada2,pass2) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus8 target 0 lun 0 (ada3,pass3) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus9 target 0 lun 0 (ada4,pass4) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus10 target 0 lun 0 (ada5,pass5) <PNY USB 2.0 FD 0.00> at scbus12 target 0 lun 0 (da0,pass6)
Code:
[root@freenas] ~# gpart show => 34 3907029101 ada0 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 34 3907029101 ada1 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 34 3907029101 ada2 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 34 3907029101 ada3 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 34 3907029101 ada4 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 34 3907029101 ada5 GPT (1.8T) 34 94 - free - (47k) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5k) => 63 125030337 da0 MBR (59G) 63 1930257 1 freebsd [active] (942M) 1930320 63 - free - (31k) 1930383 1930257 2 freebsd (942M) 3860640 3024 3 freebsd (1.5M) 3863664 41328 4 freebsd (20M) 3904992 121125408 - free - (57G) => 0 1930257 da0s1 BSD (942M) 0 16 - free - (8.0k) 16 1930241 1 !0 (942M)
Code:
[root@freenas] ~# glabel status Name Status Components gptid/38009294-1dcb-11e4-82ae-d05099013a39 N/A ada0p2 gptid/38b76d59-1dcb-11e4-82ae-d05099013a39 N/A ada1p2 gptid/3965262b-1dcb-11e4-82ae-d05099013a39 N/A ada2p2 gptid/3a143aab-1dcb-11e4-82ae-d05099013a39 N/A ada3p2 gptid/3ac8051b-1dcb-11e4-82ae-d05099013a39 N/A ada4p2 gptid/3b79f677-1dcb-11e4-82ae-d05099013a39 N/A ada5p2 ufs/FreeNASs3 N/A da0s3 ufs/FreeNASs4 N/A da0s4 ufs/FreeNASs1a N/A da0s1a
Tried to online it:
Code:
[root@freenas] ~# zpool online Deerhaven1 /dev/gptid/38b76d59-1dcb-11e4-82ae-d05099013a39.eli warning: device '/dev/gptid/38b76d59-1dcb-11e4-82ae-d05099013a39.eli' onlined, but remains in faulted state use 'zpool replace' to replace devices that are no longer present
And the drive info:
Code:
[root@freenas] ~# smartctl -q noserial -a /dev/ada1 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p9 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (AF) Device Model: WDC WD20EFRX-68EUZN0 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 9 21:28:09 2014 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (26460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 267) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 175 175 021 Pre-fail Always - 4241 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 14 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 67 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 10 194 Temperature_Celsius 0x0022 111 100 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 67 - # 2 Short offline Completed without error 00% 67 - # 3 Short offline Completed without error 00% 66 - # 4 Extended offline Completed without error 00% 11 - # 5 Conveyance offline Completed without error 00% 6 - # 6 Short offline Completed without error 00% 5 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
So, should I just hit the "replace" button and see if it brings it back?