can't access the web user interface

[heulfryn]

Hi,
Just get my old computer up with 4 gig memory. Got freenas up by boot up thru USB stick, got console up and web address. I get error when try to access that web address from web browser.
Looking for help, thanks in addvance.

Unhandled Exception
An unhandled exception was thrown by the application.

can't access thru explorer and chrome, try Firefox it does not work as well.
try Reset to factory defaults
can't ping that address

 

[krikboh]

What is your hardware?

 

[joeschmuck]

You know, it's threads like this that make me just want to do a little flaming, but I won't.

Read the forum rules and post your hardware configuration and software version you are using. You can't possibly believe we are mind readers and will provide you a magical answer. If you provide this data and maybe a little more detail about the problem, you might get an answer fairly quickly.

But, I suspect you are running FreeNAS version 9.2.x and you are running into a low RAM issue based on the error message you gave. This occurs for many people who try to run on a system well below the minimum specs. Your RAM should be 8GB or greater (will run with 7GB).

 

[Starpulkka]

Same happened me just 20min ago, hooked a monitor saw something abaut da0 filesystem corrupt da0=usb stick but zpool status looked ok djangot . py etc etc images was ok, but it still gived Unhandled Exception for http access. Maked new usb stick and booted it and uploadet backup config file (this restore operation took wayy too much long time like 15mins, (img burner to usb took 10mins setting upgrade took 5 seconds) ) and i can start do what we was planned to to tonight. Dont know about your setup, and actually dont care, i just shared my same Unhandled Exception for http access experience.

What version are you running?

It was 8.2.1. or something , i did make latest 8 usb stick for that machine, havent touched that machine like 8months so i would not doubt at all if usb stick was lil bit corrupt. Edit: nah i checked zpool history last scrub was 3months ago, so i have used it 3months ago not 8.

 

[joeschmuck]

Same happened me just 20min ago, hooked a monitor saw something abaut da0 filesystem corrupt da0=usb stick but zpool status looked ok djangot . py etc etc images was ok, but it still gived Unhandled Exception for http access. Maked new usb stick and booted it and uploadet backup config file (this restore operation took wayy too much long time 15mins ) and i can start do what we was planned to to tonight. Dont know about your setup, and actually dont care, i just shared my same Unhandled Exception for http access experience.

What version are you running?