TooMuchData
Contributor
- Joined
- Jan 4, 2015
- Messages
- 188
I'm burning-in some 6TB WD Red drives. I attempted to run badblocks and got the following error:
[jeff@freenas ~]# badblocks -wsv /dev/ada0
badblocks: Value too large to be stored in data type invalid end block (58605225
84): must be 32-bit value
The command fails for any of the 6TB drives, but runs properly for a 1TB drive. Does badblocks not support the larger disks?
Any suggestions will be appreciated.
Running FreeNAS 9.3 Stable 20150109 on ASRock C2750D4I with Crucial (2 x 8GB) CT2KIT102472BD160B, Seasonic SSR-450RM, Node 304 case. No Zpools defined yet.
Thanks for your help.
[jeff@freenas ~]# badblocks -wsv /dev/ada0
badblocks: Value too large to be stored in data type invalid end block (58605225
84): must be 32-bit value
The command fails for any of the 6TB drives, but runs properly for a 1TB drive. Does badblocks not support the larger disks?
Any suggestions will be appreciated.
Running FreeNAS 9.3 Stable 20150109 on ASRock C2750D4I with Crucial (2 x 8GB) CT2KIT102472BD160B, Seasonic SSR-450RM, Node 304 case. No Zpools defined yet.
Thanks for your help.