Indra Pramana
Cadet
- Joined
- Jul 30, 2013
- Messages
- 9
Dear all,
I am running FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty) on a SuperMicro SSG-6047R-E1R24L 4U server, and it's running fine with its 1 GBps NIC card. Recently I tried to add new 10 GBps NIC card: AOC-STGN-i2S from SuperMicro, which is running Intel 82599ES chipset, and the NIC is not detected by the system.
FreeBSD version:
FreeBSD cs-nas-01 8.3-RELEASE-p7 FreeBSD 8.3-RELEASE-p7 #1 r249203M:
Sat Apr 6 09:28:27 PDT 2013
root@build.ixsystems.com:/tank/home/jpaetzel/fn8.3/freenas/os-base/amd64/tank/home/jpaetzel/fn8.3/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
Understand that I need to load the "ixgbe" driver so I tried to load the driver via Tunables: System > Tunables > Add Tunables:
Variable: if_ixgbe_load
Value: YES
Enabled: True
However the NIC is still cannot be detected.
The NIC card comes with the CD which contain drivers for FreeBSD: ixgbe-2.5.12.tar.gz but I can't copy the file to the system because it's marked read-only. I tried to copy the file to one of the ZFS volume (which I have write access) but I am still not able to compile because it require kernel source to compile.
[root@cs-nas-01 /mnt/vol1/ixgbe/ixgbe-2.5.12/src]# make
"/usr/share/mk/bsd.kmod.mk", line 12: "can't find kernel source tree"
Any advice how can I make the NICs detected by the system? Below is the pciconf -lv output:
http://pastebin.com/HH0QSQce
Below is the dmesg output:
http://pastebin.com/rHipnaQq
ifconfig result shows that the 10G NIC card is not detected, only the 1G NIC card (igb0/1/2/3 ports) is detected:
http://pastebin.com/8JebAZeR
Looking forward to your advices.
Thank you.
I am running FreeNAS-8.3.1-RELEASE-p2-x64 (r12686+b770da6_dirty) on a SuperMicro SSG-6047R-E1R24L 4U server, and it's running fine with its 1 GBps NIC card. Recently I tried to add new 10 GBps NIC card: AOC-STGN-i2S from SuperMicro, which is running Intel 82599ES chipset, and the NIC is not detected by the system.
FreeBSD version:
FreeBSD cs-nas-01 8.3-RELEASE-p7 FreeBSD 8.3-RELEASE-p7 #1 r249203M:
Sat Apr 6 09:28:27 PDT 2013
root@build.ixsystems.com:/tank/home/jpaetzel/fn8.3/freenas/os-base/amd64/tank/home/jpaetzel/fn8.3/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
Understand that I need to load the "ixgbe" driver so I tried to load the driver via Tunables: System > Tunables > Add Tunables:
Variable: if_ixgbe_load
Value: YES
Enabled: True
However the NIC is still cannot be detected.
The NIC card comes with the CD which contain drivers for FreeBSD: ixgbe-2.5.12.tar.gz but I can't copy the file to the system because it's marked read-only. I tried to copy the file to one of the ZFS volume (which I have write access) but I am still not able to compile because it require kernel source to compile.
[root@cs-nas-01 /mnt/vol1/ixgbe/ixgbe-2.5.12/src]# make
"/usr/share/mk/bsd.kmod.mk", line 12: "can't find kernel source tree"
Any advice how can I make the NICs detected by the system? Below is the pciconf -lv output:
http://pastebin.com/HH0QSQce
Below is the dmesg output:
http://pastebin.com/rHipnaQq
ifconfig result shows that the 10G NIC card is not detected, only the 1G NIC card (igb0/1/2/3 ports) is detected:
http://pastebin.com/8JebAZeR
Looking forward to your advices.
Thank you.