Hi, I currently have a single disk (2Tb) stripe that has 127G free acording to zpool list but the Volume in it self reports only 69,5Gb of free space. Where has that 57,5Gb of space gone to?
I understand that if you for an example have a 3 disk raidz1 of 1Tb disk that zpool list will show you 3Tb while zfs list will show you 2Tb of AVAIL space.
But as I mentioned this is a single disk stripe so where are my 57,5Gb going?
I understand that if you for an example have a 3 disk raidz1 of 1Tb disk that zpool list will show you 3Tb while zfs list will show you 2Tb of AVAIL space.
But as I mentioned this is a single disk stripe so where are my 57,5Gb going?
Code:
zpool list VolGreen NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT VolGreen 1.81T 1.69T 127G - 44% 93% 1.00x ONLINE /mnt
Code:
zfs list VolGreen NAME USED AVAIL REFER MOUNTPOINT VolGreen 1.69T 69.5G 96K /mnt/VolGreen
Code:
zpool status VolGreen pool: VolGreen state: ONLINE scan: scrub repaired 0 in 2h50m with 0 errors on Sun Jul 16 08:50:57 2017 config: NAME STATE READ WRITE CKSUM VolGreen ONLINE 0 0 0 gptid/3d5481f0-f155-11e6-a627-000c296f98a8 ONLINE 0 0 0 errors: No known data errors