Configuration
TrueNAS-SCALE-22.12.2
CPU: 16 Cores AMD EPYC
RAM: 64Gb DDR4 ECC Registered
Boot drive: 50GB SATA SSD MLC
1st zfs pool "archive": 4 x 4TB NVMe M.2 SSD in raidz-1
2nd zfs pool "projects": 4 x 1.88TB NVMe M.2 SSD in raidz-1
When I run command it outputs this:
Does anyone know what is this .system subfolders are and why the 2nd pool is missing them? What is the logic here?
I thought zfs pools are created independently. But if my second zfs pool "projects" relies on some system files on the first zfs pool "archive" and something goes wrong with any of 1st pool's drives then both pools are affected?
TrueNAS-SCALE-22.12.2
CPU: 16 Cores AMD EPYC
RAM: 64Gb DDR4 ECC Registered
Boot drive: 50GB SATA SSD MLC
1st zfs pool "archive": 4 x 4TB NVMe M.2 SSD in raidz-1
2nd zfs pool "projects": 4 x 1.88TB NVMe M.2 SSD in raidz-1
When I run command
Code:
zfs list -o space
Code:
root@truenas[~]# zfs list -o space NAME AVAIL USED USEDSNAP USEDDS USEDREFRESERV USEDCHILD boot-pool 44.8G 2.64G 0B 96K 0B 2.64G boot-pool/ROOT 44.8G 2.63G 0B 96K 0B 2.63G boot-pool/ROOT/22.12.2 44.8G 2.63G 4.01M 2.63G 0B 0B boot-pool/ROOT/Initial-Install 44.8G 8K 0B 8K 0B 0B boot-pool/grub 44.8G 8.17M 0B 8.17M 0B 0B archive 10.4T 7.42G 0B 140K 0B 7.42G archive/.system 10.4T 21.3M 0B 174K 0B 21.1M archive/.system/configs-40cc91dacae0491e84781ab81ded8ba4 10.4T 256K 0B 256K 0B 0B archive/.system/cores 1024M 140K 0B 140K 0B 0B archive/.system/ctdb_shared_vol 10.4T 140K 0B 140K 0B 0B archive/.system/glusterd 10.4T 151K 0B 151K 0B 0B archive/.system/rrd-40cc91dacae0491e84781ab81ded8ba4 10.4T 18.4M 0B 18.4M 0B 0B archive/.system/samba4 10.4T 326K 0B 326K 0B 0B archive/.system/services 10.4T 140K 0B 140K 0B 0B archive/.system/syslog-40cc91dacae0491e84781ab81ded8ba4 10.4T 1.46M 0B 1.46M 0B 0B archive/.system/webui 10.4T 140K 0B 140K 0B 0B archive/archive 10.4T 7.40G 0B 7.40G 0B 0B projects 4.81T 27.5G 0B 140K 0B 27.5G projects/projects 4.81T 27.5G 0B 27.5G 0B 0B
Does anyone know what is this .system subfolders are and why the 2nd pool is missing them? What is the logic here?
I thought zfs pools are created independently. But if my second zfs pool "projects" relies on some system files on the first zfs pool "archive" and something goes wrong with any of 1st pool's drives then both pools are affected?