10gb p2p iscsi - 3 host xenserver pool

[unitstif]

Currently configuring Freenas 11.1 on a R510 with 3x 10gb Intel SPF+ NICs, 3x R620's each with a single 10gb SPF+ connected directly to FN.

Each of the 10gb p2p is in a separate network.

• 10.10.154.1/24
• 10.10.155.1/24
• 10.10.156.1/24

I've configured a single iSCSI portal with all 3 networks, in Xen when adding the SR for the host I enter 10.10.154.1, 10.10.155.1, 10.10.156.1 it then produces a list of targets, when selecting *(10.10.154.1, 10.10.155.1, 10.10.156.1) it errors out and does not list the LUN. What am I missing?

 

[dlavigne]

Is promiscuous mode enabled in the vswitch? Anything in /var/log/messages or in the VMware logs?